PFA gas washing bottle with PTFE bubbling ball

Product Introduction

A gas washing bottle is an instrument used to remove impurities from gases. It works by passing impure gas through a selected suitable liquid medium for bubble absorption (dissolution or through chemical reactions), thereby washing away impurity gases to achieve gas purification. In experimental setups with combustible gas sources, the gas washing bottle can also serve as a safety bottle.

Common Specifications: 100ml, 250ml, 300ml, 500ml, 1000ml, 2000ml, 3000ml

The gas washing bottle should not be used to store alkaline liquid detergents for extended periods. After use, promptly pour the detergent into a reagent bottle with a rubber stopper for storage, and rinse the bottle with water before placing it. This bottle can also be used to collect gases and measure gas volume.

Generally, the long tube is for gas inlet, and the short tube is for gas outlet. The long tube is used for gases denser than air, while the short tube is used for gases less dense than air.

Using the upward displacement of air method indicates that the collected gas is denser than air. The long-inlet-short-outlet configuration allows the collected gas to push the air out. If the short-inlet-long-outlet configuration is used, the collected gas will escape directly through the long tube.

Product Features

1. Transparent appearance allows continuous observation of the gas washing process inside the bottle during operation;

2. The filter bulb is made of high-purity laboratory-grade PTFE material, with fine micropores and a large number of pores, ensuring that the gas passing through the filter bulb meets cleaning standards;

3. Low leaching and precipitation, with metal impurity content below 0.01 ppb;