White Nylon Fabric B-499 Heat Transfer Printing Label
Contact Info
- Add:广州市天河区华观路1933号万科云A栋309室, Zip:
- Contact: 李秀红
- Tel:020-87588958
- Email:690665894@qq.com
Other Products
White Nylon Fabric B-499 Thermal Transfer Print Label
Product Introduction
General Purpose Nylon Fabric B-499 Thermal Transfer Print Label Product List:
Order Reference No. THT-68-499: Size 12.70mm x 19.05mm
Order Reference No. THT-69-499: Size 20.32mm x 36.50mm
BRADY B-499 Thermal Transfer/Dot Matrix Print Nylon Fabric Label Technical Performance Table
Overview: Brady B-499 is a polyamide nylon fabric label with a permanent acrylic pressure-sensitive adhesive and a surface coating suitable for thermal transfer and dot matrix printing, primarily used for general labeling purposes such as cables requiring long-term identification.
It is recommended to use Brady R4300, R4900, R6000, R6200 black, and R4500 color (red, blue, and green) series ribbons for thermal transfer printing; use Brady R2000 and R5000 series ribbons for dot matrix printing.
B-434 labels printed with Brady R4300, R4900 series ribbons for thermal transfer and R2000, R5000 series ribbons for dot matrix printing are UL certified in the United States. For details, refer to UL file MH17154.
Details:
Physical Properties | Test Method | Average Test Results |
Thickness | ASTM D1000 Test - Substrate - Adhesive - Total | 0.115mm (0.0045 in.) 0.051mm (0.0020 in.) 0.166mm (0.0065 in.) |
Adhesion to: - Stainless Steel - ABS Textured Plastic - Polypropylene | ASTM D1000 Test Adhesion 20 minutes Adhesion 24 hours Adhesion 20 minutes Adhesion 24 hours Adhesion 20 minutes Adhesion 24 hours | 50 N/100 mm (45 oz/in) 88 N/100 mm (80 oz/in) 39 N/100 mm (35 oz/in) 44 N/100 mm (40 oz/in) 26 N/100 mm (24 oz/in) 26 N/100 mm (24 oz/in) |
Tack | ASTM D2979 Test Polyken™ Probe Tack 1 second, separation at 1 cm/s | 900g (29 oz) |
Shear Test | PSTC-7 Test (except sample 1/2" × 1") | 9 hours |
Tensile Strength and Elongation | ASTM D1000 Test - Machine direction | 1400 N/100 mm (80 lbs/in), 50% |
Performance:
Test Method: Thermal transfer printed with Brady R4300, R4900, R6000, and R6200 ribbons. Dot matrix printed with Brady R2000 and R5000 ribbons. Before testing, samples are adhered to aluminum plates and allowed to set for 24 hours.
Performance | Test Method | Typical Test Results |
Short-Term High Temperature Resistance | 5 minutes at 145ºC (293ºF) | No effect at 145º C, slight shrinkage at 180º C with no impact on label performance. |
Long-Term High Temperature Resistance | 30 days at 90ºC (193ºF) | No effect at 90º C, slight fading at 110º C, severe fading at 120º C with no impact on label performance. |
Low Temperature Resistance | 30 days at -40ºC (-40ºF) | No effect |
Aging Resistance | ASTM G 26 Test, 30 days in xenon arc weatherometer | Material wrinkled and became brittle |
Moisture Resistance | 30 days at 37ºC (100ºF), 95% relative humidity | No effect |
UV Light Resistance | 30 days under UV Sunlight™-100 | No effect |
Abrasion Resistance | Taber Abraser, CS-10 wheel, 500g/arm (Federal Test Standard 191A, Method 5306) | R4300, R4900, R6000, R6200, R2000, and R5000: 150 cycles |
Chemical Testing:
Test Method: Sample labels printed with Brady I.D.Pro-Plus Wire Marker and IBM typewriter using R2000 and R5000 series ribbons, then wrapped around 12 AWG, TFE cable and tested after 24 hours at room temperature. Samples are immersed in specified chemical solvents for 10 minutes every 30 minutes, repeated 5 times. After the last immersion, wipe the label surface 10 times with a cotton ball soaked in the test solvent.
Chemical Solvent | Observed Visual Changes | ||||||||||||||||
Label | R2000 Dot Matrix Ribbon | R5000 Dot Matrix Ribbon | |||||||||||||||
Methyl Ethyl Ketone | Label completely detached | No effect | No effect | ||||||||||||||
Trichloroethane | Label completely detached | No effect | No effect | ||||||||||||||
Isopropyl Alcohol | Label completely detached | No effect | No effect | ||||||||||||||
Mineral Spirits | Label completely detached | No effect | No effect | ||||||||||||||
SAE 20 WT Oil @ 70ºC | Label turned brown | No effect | No effect | ||||||||||||||
Mil 5606 Oil | Label slightly detached and turned red | No effect | No effect | ||||||||||||||
Gasoline | Adhesive failed, label discolored | No effect | No effect | ||||||||||||||
Rust Veto® 342 | Label moderately detached and faded | No effect | No effect | ||||||||||||||
Deionized Water | No effect | No effect | No effect | ||||||||||||||
3% Alconox® Solution | No effect | No effect before wiping, moderate print removal after wiping | No effect before wiping, moderate print removal after wiping | ||||||||||||||
10% Sodium Hydroxide Solution | Label completely detached | No effect | No effect | ||||||||||||||
10% Sulfuric Acid Solution | No effect | No effect | No effect | ||||||||||||||
Northwoods™ Buzz Saw Degreaser | Label completely detached | No effect before wiping, slight print removal after wiping | No effect before wiping, slight print removal after wiping | ||||||||||||||
Speedi Kut Cutting 332 Oil | Label turned red | No effect | No effect
| ||||||||||||||
