Cast iron ground rail T-slot guide rail

Classic style cast iron T-slot ground rails, meeting your machining needs
After the scraping and acceptance inspection of the T-slot ground rails, their surfaces undergo an appearance treatment, which involves removing any residual casting sand from the bottom of the cast iron platform (plate) and applying anti-rust paint (typically red anti-rust paint).
Methods to prevent damage to the working surface of T-slot ground rails during use: Ensure that workpieces and the inspection platform for civil air defense doors avoid intense collisions to prevent damage to the working surface of the T-slot ground rails. During this process, three to four flat-head jacks should be configured for adjustment to prevent fire disaster doors; then clean the working surface of the inspection platform thoroughly and use it only after confirming no issues; proceed with the installation and debugging inspection of the T-slot ground rails; for example, the weight of civil air defense doors must not exceed the rated load of the platform, otherwise it will reduce work quality, cause damage, and deform the inspection platform for fire prevention doors, rendering it unusable.

Unidirectional nucleation: During the solidification process of metal-nonmetal systems, nonmetallic substances can serve as nucleation sites for metal solidification, but metals cannot serve as nucleation sites for nonmetallic substances. The structure of T-slot ground rails mainly consists of a metal matrix and carbonaceous components (graphite and/or carbides). Except for various white cast irons, T-slot ground rails contain free graphite, which can act as a nucleation site for austenite precipitation, whereas austenite cannot serve as a nucleation site for graphite precipitation.
Carbon has high solubility in the molten iron of T-slot ground rails, making it difficult to control the quantity and size of residual graphite particles in the molten iron, thereby complicating the control of the structure and quality of the cast iron. When melting gray cast iron, if the size of the residual graphite particles in the molten iron is slightly larger, it greatly facilitates graphite precipitation based on these particles, leading to the formation of coarse structures.
How about the crystallization and solidification of molten metal in gray cast iron T-slot ground rails achieving homogeneous nucleation, and the precipitation of graphite from the cast iron melt? Considering the nature of graphite iron, if the molten iron contains fine graphite particles, achieving homogeneous nucleation would be ideal. However, due to the following reasons, the feasibility of this method has not yet been confirmed.
In practice, the primary austenite dendrites in gray cast iron act somewhat like reinforcement bars in concrete, significantly influencing the mechanical properties of the cast iron. Most ductile iron T-slot ground rails are of eutectic or slightly hypereutectic composition. According to the equilibrium phase diagram, primary austenite should not form, so research on ductile iron has focused less on primary austenite compared to gray cast iron, with more emphasis on graphite and the matrix structure. However, under industrial production conditions, the solidification of ductile iron occurs under non-equilibrium conditions, and primary austenite dendrites precipitate before transformation, whose effects cannot be ignored.
Support the T-slot ground rails with properly placed and leveled support points to ensure even force distribution and overall stability. Position the cast iron platform support frame appropriately and gently shake it; if unstable, adjust the foot cups at the bottom of the support frame until it is stable. Leveling: Initially adjust each support foot to ensure even force distribution at all points, use a level measuring instrument to check the levelness of the T-slot ground rails, and finely adjust the relevant support points to achieve level positioning. After the initial leveling is completed, let it sit for 24 hours, then use the level measuring instrument again to check the levelness of the cast iron platform. If it deviates from level, make further adjustments until calibration is complete before use.
T-slot ground rails are specifically suitable for mechanical and engine power tests, equipment debugging, and offer good planar stability and toughness. The surface features T-slots for securing experimental equipment; they are also suitable for product work. The above points are key reasons why customers choose them!
Qili Machine Tool, Ms. Xie 13785751790