ZB24580 Power Surge Protector

ZB24580 Power Surge Protector protects 24Vdc or AC power interfaces from surges caused by direct or indirect lightning strikes.

• High-energy metal oxide varistors (MOV) combined in a network
• Three-stage composite protection
• Can be installed on standard 35mm DIN rails or any flat surface for independent applications
• Tested according to IEC801-5, CCITT K17
• Ten-year product warranty

ZB24580 Power Surge Protector Technical Specifications

Circuit Type: Parallel high-energy MOV
Line Protection: 2+G
Connector: Three-terminal pluggable terminal block
Surge Protection Capability:
10,000A 8/20 impulse/line
10,000A 8/20 ground
Let-through Voltage:
87V @ 5kV (10/700μs) CCITT K17
100V @ 1kV (8/20μs)
Clamping Voltage: <34Vac/47Vdc
Rated Voltage: 24Vdc or AC
Maximum Continuous Operating Voltage (MCOV): 30Vac/38Vdc
Leakage Current: 5 μA @ rated voltage
Load Current: <1nS
Line Resistance: 0 Ohms
Ambient Temperature Range: -40℃ to 85℃ (-40℉ to 185℉)
Humidity: 95% relative humidity (non-condensing)
Response Time: <1nS
Bandwidth: N/A
Enclosure Dimensions: 5.1”×2.3“×1.0” overall (12.95mm×5.8mm×2.54mm)