Triangular Arm Torsion Resistance Testing Machine

Triangular Arm Torsion Testing MachineControl for AutomotiveTriangularArm AssemblyStatic Torsional StrengthTesting Machine

AutomotiveControl Arm Rotational Torque Testing Machine Triangular Arm Swing Torque Swing AngleTorsion ResistanceStiffnessPerformanceTesting Machine

I. Product Introduction:

The Triangular Arm Torsion Testing Machine is used to test the input torque, torsion angle, and output torque performance of automotive control arms. It primarily conducts tests for the torsional mechanical properties of various automotive control arms (triangular arms) and stabilizer bars. Through the connection and installation with corresponding fixtures, within the allowable range of the testing machine, static torsion tests can be performed on various shaft components, structural parts, and specimens of different materials.

Testing Standards:

1. QC/T533-1999 "Bench Test Method for Automotive Drive Axles"

2. JB/T9370-2007 "Technical Conditions for Torsion Testing Machines"

3. GB10128-2007 "Metallic Materials—Torsion Test Method at Room Temperature"

4. JJG269-2006 "Verification Regulation for Torsion Testing Machines"

II. Features:

This equipment consists of a loading system, transmission system, precision testing system, test base, computer control software, and multiple sets of fixtures. It can measure curves such as torque, failure torque, torsional strength, torsional stiffness, torsion angle, torque-torsion angle, torque-time, and torsion angle-time relationships.

The machine adopts a horizontal structure, computer control, a fully digital data acquisition control system, and a fully digital AC servo system. It features uniform and stable loading, no impact phenomena, and accurate data acquisition control.

III. Technical Parameters:

1. Torque Range: 20000 N·m

2. Torque Measurement Range: 200-20000 N·m

3. Relative Error of Indicated Torque: Grade 1 (±1%)

4. Torque Resolution: 1/300,000 codes, full-range resolution remains unchanged

5. Test Space: 2500 mm

6. Coaxial Accuracy Between Fixtures: ≤ Φ0.2 mm within 1000 mm range

7. Torsion Angle Measurement Range: Unlimited

8. Minimum Readable Value: 0.1°

9. Relative Error of Torsion Angle Measurement: ±1.0%

10. Torsion Speed: 0.05-360°/min, stepless speed regulation, arbitrarily set

11. Relative Error of Torsion Speed: Within ±1.0% of the set value

12. Power Supply Voltage: AC380V 50Hz

13. Torsion Direction: Forward rotation, Reverse rotation