|
FO-008B Release Agent is an epoxy resin release agent. Compared with similar products, it has advantages such as low release force, fine surface, and stable quality.
Main Technical Parameters
|
Appearance |
Milky white
|
|
Release Force N/100cm²
|
≤40
|
|
Appearance of Released Product
|
Fine, no skin
|
| Moisture ppm
|
≤500
|
|
Applicable Temperature ℃
|
30～70
|
Usage Method:
1. First, thoroughly clean the mold with an appropriate solvent or cleaner to remove any residual release agent or other contaminants, then dry with a clean cloth or towel.
2. Use airless or air-assisted spraying equipment, or apply with a brush or cotton cloth.
3. On the pre-treated or cleaned mold, spray 2-5 even coats of FO-008B to ensure complete coverage.
4. After each release, apply another even coat of FO-008B over the entire mold to ensure good release performance.
Storage and Handling Methods:
1. Store FO-008B at -5~35°C for optimal performance.
2. Keep the container sealed when not in use to prevent solvent evaporation.
3. FO-008B has low hazard under normal use conditions.
|
