CBFS Series Electric Ball Valve

Product Overview:

The CBFS series switch-type electric ball valve consists of a valve actuator and a ball valve body. It is used to control the opening or closing of pipelines in central air conditioning fan coil systems or heating systems to achieve temperature control. By opening or closing the valve, the indoor temperature is maintained within the range set by the thermostat. This series of electric ball valve actuators and valve bodies are connected by threads, allowing the actuator to be installed after the valve, making on-site assembly convenient. It features a compact design and large flow diameter.

Technical Parameters:

Control Characteristics: Three-wire two-control, motor-driven reset

Operating Voltage: AC220V±10%  AC24V DC24V  50/60Hz

Power Consumption: 6W (only when opening or closing the valve)

Housing Material: Flame-retardant PC (internal components made of flame-retardant reinforced PA)

Caliber: DN15, DN20, DN25, DN32, DN40, DN50

Action Time: 15–20S (open to close)

Lead Length: 30cm

Nominal Pressure: 1.6MPa

Leakage: ≤0.008% Kcs (when pressure difference is less than 500Kpa)

Medium Temperature: 2°C–90°C

Protection Level: IP68

Note: For control characteristics such as three-wire one-control, three-wire two-control, three-wire two-control can be configured with six-wire passive feedback or five-wire active feedback. Please specify when ordering.