Fire Control Automatic Inspection Cabinet Constant

        The fire automatic inspection cabinet, also known as the fire intelligent digital inspection device. This device can prevent faults such as corrosion, dampness, and abnormal operation of fire pumps, truly achieving the purpose of "maintaining troops for a thousand days to use them in a critical moment." The inspection is low-frequency, with the motor running at 300 RPM during inspection, without increasing water system pressure or startup current, significantly extending the equipment's service life. The inspection method     is highly safe, with low current and low power consumption, complying with industry standards.

      1. Automatic inspection device control function: It performs low-frequency automatic inspection control for fire pumps and sprinkler pumps, as well as low-speed automatic inspection for spray pumps. The inspection cycle is 24 hours, with each single pump inspection lasting 10 minutes. The inspection cycle and duration can be adjusted from a few minutes to several days based on actual requirements. In the event of a fire, the programmable controller will instantly stop the inspection upon receiving the fire command, start the fire pump, and manually shut down after the fire is extinguished.

       2. The device features audible and visual alarms and fault memory function. The operation is clear and easy to understand with a Chinese menu, capable of memorizing faults such as short circuits, phase loss, overcurrent, overvoltage, undervoltage, and communication errors, facilitating maintenance and operation by personnel.

If a fire occurs during inspection, the inspection will immediately stop, and the fire pump will start instantly. It is fully functional, capable of performing low-speed and pressure-free inspection of the main fire circuit and fire pumps. It includes protections against overvoltage, overcurrent, short circuits, and phase loss. In case of a fault during inspection, the automatic inspection device will trigger audible and visual alarms and has a data memory function to record transient parameters at the time of the fault, aiding in maintenance and analysis.