Meltblown Cloth Industrial Air Cooler

Baochiyuan's main products: air coolers, oil coolers, water chillers, cooling towers, air conditioners, constant temperature and humidity air conditioners, heat pump units, heat recovery refrigerators, clean air handling units, etc.

Meltblown Cloth Industrial Air Cooler

Some reasons why meltblown cloth becomes brittle and hard
Uneven spinning, insufficient air volume of the air cooler! Causes uneven heat dissipation, generating internal stress leading to brittleness! It can be improved by adjusting the melt volume of the extruder, adjusting the temperature of the hot air blower, and increasing the air volume of the air cooler!

The meltblown cloth industrial air cooler produced by Baochiyuan has a large air volume, and the outlet air temperature can be adjusted from 5-20 degrees, making it a good helper for solving your problems.

Detailed Introduction

Meltblown Cloth Industrial Air Cooler

I. Working Principle of the Meltblown Cloth Industrial Air Cooler

According to the principle of the refrigeration system, the low-temperature and low-pressure liquid refrigerant undergoes heat exchange with the surrounding air in the evaporator. The evaporator absorbs the heat from the air, evaporating into a low-temperature and low-pressure gas. During the evaporation process, the refrigerant temperature remains unchanged. The low-temperature and low-pressure gaseous refrigerant enters the compressor, is compressed into a high-temperature and high-pressure gas, and then enters the condenser. In the condenser, it undergoes heat exchange with the indoor medium. Part of the heat from the high-temperature and high-pressure gaseous refrigerant is absorbed by the medium, raising the medium's temperature. The refrigerant releases heat and the condenser turns into a high-temperature and high-pressure liquid. The condenser process temperature remains unchanged. It then enters the expansion valve for throttling, which is a rapid cooling process. The refrigerant becomes a low-temperature and low-pressure liquid. After this process, the refrigerant re-enters the evaporator for heat exchange and evaporation, thus completing the entire refrigeration system process. This cycle continues continuously, allowing the air to be continuously cooled. The cold air is then blown by the fan to the area that needs cooling.

II. Classification of Air Coolers

1. By Cooling (Heat Dissipation) Method

A. Water-cooled air cooler: (Shell and tube type) condenser equipped with a cooling tower for heat dissipation.

B. Air-cooled air cooler: (Finned type) condenser dissipates heat through the unit's own fan.

Air cooler selection: Generally, choose the appropriate water-cooled or air-cooled air cooler based on the cooling capacity (air volume and temperature).

Air-cooled characteristics: Named after the heat dissipation method, it contains a finned condenser inside the unit for heat dissipation, eliminating the need for an additional cooling water tower. Installation and movement are very convenient. However, it requires good ventilation in the workshop environment; otherwise, it will directly affect the cooling effect.

Water-cooled characteristics: Water-cooled air coolers require additional installation of a cooling water tower and a water pump to extract hot water for heat dissipation to achieve efficient cooling效果.