Adhesive for bonding small areas of ABS to aluminum alloy

Small Area ABS to Aluminum Alloy Adhesive

Main features of the adhesive: Can be directly applied, fast curing speed, suitable for rapid bonding of silicone to silicone, silicone to plastic, metal, bamboo/wood, paper, ceramic, TPV, and other materials. After bonding, the silicone material can achieve the effect of tearing the silicone without debonding (the two bonded surfaces fuse into one). It is characterized by resistance to boiling water, high and low temperatures, tensile strength, aging resistance, waterproof, oil resistance, high transparency, easy operation, no whitening, and environmental friendliness.
Product Attributes
Single-component liquid instant adhesive, can bond aluminum alloy, plastic, silicone

Shang Hao Jia Adhesive Application Range

1. Widely used for bonding silicone to silicone, silicone to plastic, plastic to plastic, TPR to ABS adhesive, TPR to TPR adhesive.

2. Bonding between silicone and various plastics, silicone to ABS adhesive, silicone to TPR adhesive, silicone to bakelite adhesive, silicone to nylon adhesive.

3. Bonding between silicone and various metals, silicone to stainless steel adhesive, silicone to iron adhesive, silicone to aluminum alloy adhesive, silicone to magnet adhesive, etc.

4. Bonding between silicone and various rubber materials.

5. For bonding special performance materials, such as stainless steel, aluminum alloy, magnets, nickel-plated metals, and other hardware materials, ceramics, PP, PE, nylon, and other difficult-to-bond plastics, thermoplastic elastomers, etc.

Usage Method

1. Apply an appropriate amount of adhesive on the surface of the substrate to be bonded (depending on the bonding area, a dispensing tube or needle can be attached to the nozzle tip to control the amount of adhesive).

2. After applying the adhesive, press the two surfaces together. It will set in 3-5 seconds and achieve the tear-resistant effect without debonding in 3-5 minutes.