ABS adhesive for nylon passes drop test.

ABS Bonding Nylon Adhesive Can Pass Drop Test

Shang Hao Jia 801 Single-Component Nylon Adhesive, ABS Bonding Nylon Adhesive, Silicone Bonding Nylon Adhesive, Bonding Nylon Adhesive

Applicable Bonding Materials: Can be used for most materials, metal bonding soft TPR, plastic bonding metal, rubber bonding metal, production of data cable connectors bonding PVC, metal bonding POM, acrylic diamond bonding ABS, ABS bonding ABS, iron bonding ABS, alumina bonding ABS, silicone bonding magnet, PVC bonding metal, rubber bonding ceramic, etc. It has excellent bonding effects on electroplated metal materials.

Product Features: Fast curing speed, high bonding strength, low odor, no whitening, good temperature resistance

Friendly Reminder: The lower the temperature, the slower the adhesive setting time

Usage Method:

1. Surface Treatment: Use a dry cloth or sandpaper to remove dust, oil, rust, etc., from the surface, then wipe with a diluent to clean the bonding surface.

2. Adhesive Application:

(1) Unscrew the front cap to use. If there is adhesive at the bottle mouth, first wipe it clean with a cloth, then attach the needle or PE dropper for use. Pay attention to controlling the adhesive flow to ensure bonding effectiveness.

(2) Apply a small drop of adhesive to the bonding surface, then proceed with bonding and hold until hardened. The hardening time varies from a few seconds, generally about 5-10 seconds, reaching practical strength in 30 minutes and high strength after 24 hours.

(3) After use, clean the bottle mouth and tighten the cap to prevent solidification before next use.

(4) Store the adhesive in a cool, dry place after use.