Water-based release agent

Mold release agent combines the characteristics of similar domestic and international products. It is a new high-efficiency separation agent, a microemulsion synthesized through special processes using nano-molecular synthesis technology with high molecular polymers and various chemically active substances. It offers stability and strong isolation performance. This product does not corrode molds and does not affect the surface or quality of concrete. It forms a stable, smooth, high-strength isolation film on the surface 15 minutes after application. This film has a certain duration and excellent resistance to heat and rain washout. The product is suitable for road, bridge, and tunnel engineering, and widely used in concrete construction for cement pipes, high-pressure pipes, bridges, pipe piles, tread floor slabs, and all types of steel, wood, bamboo, plastic, aluminum, resin, ground, and concrete formwork in building components. It significantly reduces the occurrence of bubbles and surface defects, resulting in a clean, high-gloss concrete surface without pollution. It is the most economical and environmentally friendly mold release product for creating high-standard model projects. Main products include subway segment mold release agent, track slab mold release agent, and bridge mold release agent.

[Performance Characteristics]

◎ Water-based high molecular composite formula, environmentally friendly product; non-toxic, odorless, non-flammable, easy to use.

◎ Rapid film formation, water-resistant washout protection for formwork, no residue; waterproof, rust-proof.

◎ Excellent isolation performance, clean and smooth concrete surface without pollution.

◎ Easy demolding, maintaining a smooth and flat surface with intact edges and corners after demolding.

[Technical Parameters]

Appearance: White emulsion

pH value: Neutral (6~8)

Solid content: ≥22%

Dosage: 20~25 square meters per kilogram

[Instructions for Use]

◎ Depending on the application, dilute with water 1 to 5 times. Customers can adjust according to actual conditions. Dilute with water to the desired concentration, then spray with a gun or apply evenly with a brush/cloth onto the mold.

◎ Apply or spray this product on the inner side of the formwork before installation. It separates easily from the concrete surface during demolding, improving concrete surface quality and increasing formwork reuse cycles. 3. Clean the formwork thoroughly before application; there should be no rust or concrete residue. ◎ Stir this product evenly, then spray or brush it onto the formwork before pouring concrete.

[Precautions]

◎ Stir the mold release agent evenly before use. Note: exposure to strong acids or alkalis may cause demulsification.

◎ Do not miss any areas during application. Prevent leakage and slipping during construction.

◎ Avoid application on rainy days, but once dried, it is rain-resistant. If rained on, reapply the mold release agent.

◎ For steel molds using mold release agent, if not used for a long time, apply multiple layers before storage to prevent rust during long-term placement.

[Packaging and Storage]

◎ Packaging: 25 kg and 50 kg plastic drums. Transport according to non-hazardous goods regulations.
◎ Store in sealed containers in a cool, ventilated place. Shelf life at room temperature is one and a half years.