Lifting tool 26mm wire rope clamp wire rope clip

How to choose wire rope clips for lifting machinery and hoisting equipment?

1. "Wire rope clips (national standard forged)" are suitable for more critical load-bearing environments.Recommended industries: cranes, pile drivers, mining, metallurgical equipment, oil rigs, port machinery, elevators, and other hoisting machinery. According to standard GB/T 5976—2006 "Wire Rope Clips" Article 4.2.4, when clips are used on cranes, it is recommended to use forged wire rope clips. (Reference: GB/T5976-2006 Wire Rope Clips).

Tieren Machinery has found that some cast wire rope clips on the market may have defects such as pores or sand holes. Under destructive heavy pressure, the clip base may break. However, wire rope clips (national standard forged) have undergone multiple destructive pressure tests. Even if the clip base undergoes plastic deformation, it will not break.

2. When selecting wire rope clips, first identify the lay direction of the wire rope, i.e., right lay or left lay. According to the standard: the surface of the wire rope clip groove should match the lay direction of the wire rope surface. Therefore, wire rope clips are also divided into left clips and right clips and should be selected appropriately; they are not interchangeable. Incorrect selection will reduce the friction coefficient.

3. Compared to cast wire rope clips, wire rope clips (national standard forged) have a higher density of internal structural units, and the arc groove matches the wire rope for higher binding strength. Additionally, when purchasing wire rope clips, special attention should be paid to inspecting the U-bolt thread dimensions. The thread outer diameter should meet the requirements of GB/T 197-2003. Excessive clearance between the thread and the nut will reduce the gripping force. The U-bolt opening size should meet standard requirements. An oversized opening may cause misalignment of the rope strands, while an undersized opening may reduce clamping force. Carefully inspect before use.

4. Other considerations: Wire rope clips (national standard forged) have anti-slip grooves designed to match the lay direction of the wire rope. If the wire rope has a special structure such as eight strands or triangular strands, inform the supplier before placing an order.

5. Correct arrangement of wire rope clips: The clip spacing should comply with standard regulations, typically 6-7 times the rope diameter (this applies to natural state and when using thimbles). Wire rope clips that have been used under load are generally not recommended for reuse. If wire rope clips are to be used in combination with other connectors, please consult Tieren Machinery customer service.