TY-DCL600 Residual Chlorine\Total Residual Chlorine\Chlorine Dioxide Analyzer
Contact Info
- Add:西安市高新区唐延南路11号, Zip:
- Contact: 谭东东
- Tel:13720774318
- Email:509857967@qq.com
Other Products
Product Introduction
The membrane-based residual chlorine/total residual chlorine/chlorine dioxide electrode is a composite digital electrode utilizing the membrane amperometric method. The detection part employs special permeation membrane technology, offering resistance to chemical interference (primarily surfactants) and reduced pH dependency. The sensor is not limited by water quality conditions and can be applied in environments such as tap water, swimming pools, medical wastewater, sewage treatment, and industrial wastewater. It features fast response, stable performance, low cost, and minimal maintenance, providing users with reliable and accurate data.
Features
lLargely unaffected by pH;
lDigital signal processing internally, immune to electromagnetic interference;
lStable operation with fast response time;
lNo zero calibration required;
lLow cost with minimal maintenance;
Typical Applications
lConventional drinking water, tap water, pool water, aquaculture, seawater;
lMedical wastewater, medical sewage;
lDosing equipment, circulating water, cooling water;
Sensor Technical Parameters
Range | 0-2ppm; 0~20 ppm; 0.5~200ppm |
pH Range | pH value: 4~9 |
Conductivity Range | 10μS/cm~50mS/cm (seawater) |
Flow Rate | In flow cell: 250~500ml/min |
Slope Drift | Approximately -1% per month |
Response Time | T90: About 2 minutes (to reach 90% of measured value) |
Zero Calibration | Not required |
Slope Calibration | Analyzed and measured via DPD-1 method on the measurement device |
Temperature Compensation | Integrated automatic temperature compensation |
Material | PVC-U, stainless steel, microporous hydrophilic membrane |
Operating Temperature | Water temperature: 0~45℃ (no condensation in water) Ambient room temperature: 0~55℃ |
Output Signal | Digital signal (isolated MODBUS RS485) |
Dimensions | Diameter 25mm * Length 205mm |
DS-115T Controller Technical Parameters:
Display Output | 128*64 graphic dot matrix LCD with strong LED backlight, operable under direct sunlight |
Power Supply | AC power: 85-500VAC (50/60HZ); DC power: 9~36VDC |
Main Materials | PA66+GF25+FR (upper cover); powder-coated aluminum alloy (lower shell) |
Output | Three channels of 4-20mA |
Relays | Three relays, with programmatically set response parameters and values |
Digital Communication | Equipped with MODBUS RS485 communication function for real-time data transmission |
Storage Temperature | -20 to 70℃ |
Operating Temperature | -15 to 60℃ |
Waterproof Rating | IP65/NEMA4X |
Dimensions | 145mm*125mm*162mm (L*W*H) |
Weight | 1.35KG |
| Industry Category | Measurement-Analysis-Instruments |
|---|---|
| Product Category | |
| Brand: | 陕西天韵 |
| Spec: | TY-DCL600 |
| Stock: | |
| Origin: | China / Shaanxi / Xianshi |
