28.5 kilograms of 350# petroleum asphalt felt

Where to find 350# petroleum asphalt felt rolls of 28.5kg per roll? Henan Yuecheng Waterproof Material Co., Ltd. (referred to as "Yuecheng Company"), whose predecessor was established in 2006 and reorganized in 2016, is located in Zhengzhou City, Henan Province. It is a professional manufacturer specializing in the production and sales of rolls and coatings.

Product Introduction:

 Asphalt felt, commonly known as tar paper, is a waterproof material used in the construction industry. The base paper has a loose texture, good oil absorption, and certain tensile strength. It is typically made from rags, waste paper, etc., with higher grades possibly incorporating some animal hair and mineral wool, directly pulped and formed. During processing, the base paper is passed through molten asphalt, squeezed by hot rollers to saturate the paper layers with asphalt, and excess asphalt is extruded. The surface is then sprinkled with talcum powder or mica flakes and cooled. It is now less commonly used.

Product Characteristics:

The asphalt felt waterproof and moisture-proof material produced by our company is mainly used for waterproofing tile roofs and simple panel houses. It is easy to use and low-cost.

The asphalt paper-based felt product has excellent waterproofing and anti-aging properties, with characteristics such as no flow at high temperatures, no cracking at low temperatures, simple construction, no pollution, and a long service life.

Application Range:

Moisture-proof, waterproofing, and isolation layers; widely used for simple waterproofing, temporary building waterproofing, building moisture-proofing, packaging, and single or multi-layer waterproofing for roofs, underground, and water conservancy projects.

Construction Methods:

1: Base treatment and requirements: Before laying the felt, inspect the base (leveling layer) to ensure it meets national standards.

2: Before laying the asphalt felt, apply a layer of cold primer evenly on a dry and clean base. Allow it to dry for more than 12 hours before proceeding to the next step.

3: When the roof slope is less than 3%, the felt should be laid parallel to the ridge; for slopes between 3% and 15%, it can be laid parallel or perpendicular to the ridge.

4: The felt should be laid flat and compacted. Overlaps and edges should be carefully sealed with asphalt binder. The thickness of the asphalt binder for bonding each layer of felt is generally 1–1.5mm, with a maximum of 2mm. During laying, apply the adhesive while rolling out the felt, ensuring firm bonding and straight laying.

5: After the waterproof layer of the asphalt felt roof is laid and passes inspection, the protective layer should be immediately adhered.

Product Features:

Good flexibility, anti-aging, simple construction, low cost, etc.

Product Specifications:

1m * 20m asphalt felt with a width of 1m, length of 12m ±0.3m, and thickness of 0.3-0.5mm. (Length can be customized as needed.)

Note: Our company can produce various specifications of petroleum asphalt felt with excellent waterproof performance, strong tensile strength, smooth oil surface, attractive patterns, and simple construction. Each roll's weight and length comply with international standards, offering a long service life suitable for waterproofing projects in any building.