Vertical Hydraulic Baler, Waste Compressing Baler

Product Performance Characteristics: This series of products is widely used in various printing factories, plastic factories, waste paper factories, hardware factories, used goods recycling companies, and other enterprises. It is suitable for the baling and recycling of used goods, waste paper, plastics, etc. It is an excellent equipment for improving labor efficiency, reducing labor intensity, saving manpower, and cutting transportation costs. The nominal pressure comes in various specifications such as 30-50-60-80-100-120-150 tons. Additionally, custom designs can be made according to user requirements. Machine Function and Use: This machine is suitable for baling waste materials such as waste paper, waste plastic, plastic bottles, cans, and foam.

Installation Precautions: 1. First, place the machine on a level surface without any shaking, then add No. 68 hydraulic oil. The amount of oil added depends on the tonnage of the equipment. 2. The machine's motor is a 4-pole, 380V—50HZ. Please check whether the local voltage matches the machine's requirements. After connecting the wires (the wire size should correspond to the motor's power), turn on the power and verify the motor's rotation direction (indicated by the arrow) is clockwise. If the direction is incorrect, adjust the connection of the two live wires. Maintenance: The machine should be operated and maintained by designated personnel. After work each day, turn off the main power, clean debris around the machine, remove any foreign objects inside the machine, and apply appropriate lubricant to moving parts to reduce wear. Regularly check whether screws in various parts of the machine are loose. On new machines, parts prone to loosening include the small flange screws on the central shaft and the four 5/8 large screws inside the pressure plate. These should be tightened regularly. Safety Precautions: Before starting the baling process, first check whether all doors are closed properly, whether the door lock is fully engaged, whether the blade latch is secured, and whether the safety chain is attached to the handle. Do not proceed with baling if any of these parts are not properly secured to avoid accidents. When the machine is operating, stand beside the machine and avoid putting your head, hands, or any part of your body inside the door to prevent crushing injuries.

Operating Method

1. After completing the above checks, begin baling. First, place a piece of cardboard, woven bag, or plastic film at the bottom of the baling chamber to facilitate threading the wire after baling. Then, place the waste material into the baling chamber, ensuring it is evenly distributed and does not exceed the sides of the chamber. If the material exceeds the sides, it can easily bend or deform the door, and in severe cases, break the main cylinder. (Note: After placing the waste material, do not put your hands inside the baling chamber.)

2. Press the ON switch to start the motor and oil pump. Move the manual valve to the down position, and the pressure plate will automatically press down until it can no longer descend. The sound of the motor will change when pressing down. If you need to pause during the pressing process, move the manual valve to the middle position. The pressure plate will pause, but the motor will continue running. When the manual valve is moved to the up position, the pressure plate will rise until it reaches the upper limit switch, at which point it will automatically stop. To stop the machine entirely, press the OFF button and move the manual valve to the middle position.

3. During the baling process, if the material in the baling chamber exceeds the lower limit of the pressure plate and the pressure reaches 150 kg/cm², the overflow valve will activate, maintaining a pressure of 150 kg. The motor will make a noise indicating sufficient pressure, and the pressure plate will hold its position without pressing further. If the material has not reached the required baling height, move the manual valve to the up position to add more material. Repeat this process until the baling requirements are met. (Note: The typical baling height is 900mm and should not exceed 1000mm, as exceeding this height may make unloading the bale difficult.)

4. To unload the bale, move the manual valve to the middle position and press the OFF button to pause the pressure plate. Then, open the door to thread the wire and remove the bale. Door opening sequence: When opening the door, stand in front of the machine. First, open the upper front door, then the lower front door. When opening the lower door, stand at a 45-degree angle to the front of the machine and keep as far away as possible, as the blade latch has strong rebound force when released. Ensure no one is nearby before opening the door. The method for opening the rear door is the same as for the front door.