2L Internal Mixer

I: 2L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer Introduction:

2L Internal Mixer | Internal Mixer 2L | Small Internal Mixer, 2-liter laboratory small internal mixer heating type is suitable for: various plastics, chemical fibers, masterbatches, ceramic powder, iron powder, Teflon, zirconia, polyethylene, polytetrafluoroethylene, recycled nylon, etc. Cooling type is suitable for: rubber, natural rubber, silicone rubber, silicone, nitrile, EPDM, butyl and other synthetic rubbers, rubber powder, etc. Taiwan technology and configuration, anti-powder leakage, easy color cleaning, energy-saving, environmentally friendly, strong pressure X-shaped inner rotor for more uniform material dispersion. The company holds a patent for anti-powder leakage, please feel free to choose.


II: 2L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer Application Scope:


2L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer is widely used in raw materials for rubber and plastic products such as EVA, PVC, TPR, PE, PP, PC metal powder, ceramic powder, functional masterbatches, rubber additives, shoe materials, rubber tires, sealing parts, electronic products, wires and cables, automotive products, etc.


III: 2L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer Technical Features:

2L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer has a small footprint, energy-saving, safe, easy to operate, good dispersion, low noise, long service life, very low maintenance frequency, built-in dust collector, all technologies from Taiwan, core components imported. The 2L internal mixer is one of the small internal mixers, with high precision, allowing material formulators to more accurately grasp the changes and characteristics of materials. The small internal mixer is designated by many domestic universities and institutions, and has established long-term cooperation with more than 30 universities nationwide. For example: Tsinghua University, Chinese Academy of Sciences, South China University of Technology, Nanjing University, Xi'an University, Xi'an Jiaotong University, Harbin University of Science and Technology, Shanghai University, Central South University, Xiamen University, Yueyang Baling Petrochemical, Beijing Yanshan Petrochemical, Zibo Qixiang Tengda Chemical, Tianjin Petrochemical, China Academy of Engineering Physics, Wuhan Wangrui Laboratory, Kraton Polymers, and many other well-known institutions.

IV: 2L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer Working Principle:

When the 2L Internal Mixer | Internal Mixer 2L | Small Internal Mixer is working, the two rotors rotate relative to each other, clamping the material from the feed port and bringing it into the roll gap, where it is squeezed and sheared by the rotors. After passing through the roll gap, it hits the tip of the lower plunger and is divided into two parts, which return to the top of the roll gap along the gap between the front and rear chamber walls and the rotors. During the flow around the rotor, the material is subjected to shear and friction everywhere, causing the temperature of the compound to rise sharply and the viscosity to decrease, increasing the wetting of the rubber on the surface of the compounding agents, allowing the rubber to fully contact the surface of the compounding agents. The compounding agent agglomerates pass through the gaps between the rotors, between the rotors and the upper and lower plungers, and the inner wall of the mixing chamber along with the rubber, and are broken by shear, surrounded by stretched and deformed rubber, and stabilized in the broken state. At the same time, the ribs on the rotor cause the rubber to move axially along the rotor, playing a mixing role, making the compounding agents evenly mixed in the rubber. The compounding agents are repeatedly sheared and broken, the rubber repeatedly deforms and recovers, and the continuous stirring of the rotor ribs disperses the compounding agents evenly in the rubber and achieves a certain degree of dispersion. Because the shear effect on the rubber during mixing in the internal mixer is much greater than that in the open mill, and the mixing temperature is higher, the efficiency of mixing in the internal mixer is much higher than that in the open mill.


V: 2L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer Technical Parameters:

Mixing capacity:------------------------2L

Drive motor:-----------------------3.7KW

Tilting motor:------------------------400W

Tilting angle:------------------------110 degrees

Approximate output:-------------------------1.5-2.8KG/batch

Machine weight:--------------------------800KG

Dimensions:---------------------------1660*900**2000mm

Friendly reminder: This machine can be equipped with PLC program control according to customer requirements.