Import-Substitution Hassle-Free 1L Lab Internal Mixer

I: 1L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer Introduction: 1L Internal Mixer | Internal Mixer 1L | Small Internal Mixer, 1-liter laboratory small internal mixer heating type applicable: various plastics, chemical fibers, masterbatches, ceramic powder, iron powder, Teflon, zirconia, polyethylene, polytetrafluoroethylene, recycled nylon, etc. Cooling type applicable: rubber, natural rubber, silicone rubber, silicone, nitrile, EPDM, butyl, and other synthetic rubbers, rubber powder, etc. Taiwan technology and configuration, leak-proof powder, easy color cleaning, energy-saving, environmentally friendly, strong pressure X-shaped inner rotor for more uniform dispersion of materials. The company holds a patent for leak-proof powder, please feel free to purchase.
II: 1L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer Application Range: 1L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer is widely used in EVA, PVC, TPR, PE, PP, PC metal powder, ceramic powder, functional masterbatch, rubber additives, shoe materials, rubber tires, sealing parts, electronic products, wires and cables, automotive products, and other raw materials for rubber and plastic products.
III: 1L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer Technical Features:
1L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer has a small footprint, energy-saving, safe, easy to operate, good dispersion, low noise, long service life, very low maintenance frequency, built-in dust collector, all technologies from Taiwan, core components imported. The 1L internal mixer is one of the small internal mixers, high precision, allowing material formulators to grasp the changes and characteristics of materials. The small internal mixer is selected by many domestic universities and has established long-term cooperation with more than 30 universities nationwide. For example: Tsinghua University, Chinese Academy of Sciences, South China University of Technology, Nanjing University, Xi'an University, Xi'an Jiaotong University, Harbin University of Science and Technology, Shanghai University, Central South University, Xiamen University, Yueyang Baling Petrochemical, Beijing Yanshan Petrochemical, Zibo Qixiang Tengda Chemical, Tianjin Petrochemical, Wuhan Wangrui Laboratory, Kraton Polymers, and many other well-known institutions.
IV: 1L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer Working Principle: When the 1L Internal Mixer | Internal Mixer 1L | Small Internal Mixer is working, the two rotors rotate relative to each other, clamping the material from the feed port and bringing it into the roll gap where it is squeezed and sheared by the rotors. After passing through the roll gap, it hits the lower drop door's sharp edge and is divided into two parts, which return to the top of the roll gap along the gap between the front and rear chamber walls and the rotors. During one cycle around the rotor, the material is subjected to shearing and friction everywhere, causing the temperature of the compound to rise sharply and the viscosity to decrease, increasing the wetting of the rubber on the surface of the compounding agents, allowing full contact between the rubber and the surface of the compounding agents. The compounding agent agglomerates pass through the gaps between the rotors, the rotor and the upper and lower drop doors, and the inner wall of the mixing chamber with the compound, are sheared and broken, surrounded by stretched and deformed rubber, and stabilized in the broken state. At the same time, the ribs on the rotor cause the compound to move axially along the rotor, playing a stirring and mixing role, making the compounding agents evenly mixed in the compound. The compounding agents are repeatedly sheared and broken, the compound repeatedly deforms and recovers, and the continuous stirring of the rotor ribs disperses the compounding agents evenly in the compound and achieves a certain degree of dispersion. Since the shearing action on the compound during mixing in the internal mixer is much greater than that in the open mill, and the mixing temperature is higher, the efficiency of the internal mixer is much higher than that of the open mill.
V: 1L Internal Mixer | Experimental Internal Mixer | Small Internal Mixer Technical Parameters: Mixing capacity:------------------------2L Drive motor:-----------------------3.7KW Tilting motor:------------------------400W Tilting angle:------------------------110 degrees Approximate output:-------------------------1.5-2.8KG/batch Machine weight:--------------------------800KG Dimensions:---------------------------1660*900**2000mm Friendly reminder: This machine can be equipped with PLC program control according to customer requirements.