Experimental 16-inch Open Mill High-Temperature Resistant Rubber

I: 16-Inch Open Mixing Mill | 16-Inch Rubber Mixing Machine | Mixing Mill Manufacturer Technical Parameters


Item / Model Unit WBL-400/16-Inch
Roller Specification mm 400*1000
Front Roller Linear Speed min 24
Speed Ratio
1:1.2-1.3
Roller Gap mm 0~10
Approx. Batch Mixing Capacity kg 20~35
Motor Power kw 40
Approx. Machine Weight kg 8000
Approx. Overall Dimensions m 4.92*1.78*1.8

II: 16-Inch Open Mixing Mill | 16-Inch Rubber Mixing Machine | Mixing Mill Manufacturer Application Range

The 16-inch open mixing mill is mainly used for: mixing and plasticizing of raw materials such as rubber products, shoe materials, rubber tires, automotive products, electronic products, plastic products (EVA/PVC/TPU/TPR/PP/PE/PA), wires and cables, metal powder, ceramic powder, zirconia, etc. III: 16-Inch Open Mixing Mill | 16-Inch Rubber Mixing Machine | Mixing Mill Manufacturer Features

1. The gap adjustment method is manual.

2. Roller bearing positions use rolling bearings, and the lubrication method for roller bearings is grease.

3. The machine is equipped with an overload protection device to protect key components from damage due to overload.

4. The machine is equipped with an emergency brake. In case of an emergency, there are emergency switches at all four corners for convenient multi-point braking, allowing the machine to stop quickly. Pulling the emergency switch immediately stops the machine, ensuring safety and reliability.

5. Integrated base plate for easy installation. The transmission method uses single-axis output to ensure high torque. Imported bearings reduce friction, ensuring energy savings, low noise, and uniform, parallel, and controllable rubber thickness.

6. Core technology and main components are sourced from Taiwan.

7. Rollers are made of vanadium-titanium alloy chilled cast iron, with a hard and wear-resistant surface for durability. The inner cavity of the rollers is precision-machined to ensure rapid and uniform cooling.

8. The transmission system uses hard-tooth surface reducers, which are compact, highly efficient, low-noise, and have a long service life.

9. The machine uses manual gap adjustment for precise thickness control and easy operation.

10. The electrical control part uses advanced domestic electrical components for convenient operation and stable performance.