Vanguard Flow Cytometer Filter Ultrasonic Cleaner

Flow Cytometer Filter Ultrasonic Cleaner

The optical system of a flow cytometer consists of several sets of optical lenses, apertures, and filters, which can be broadly divided into two groups: pre-flow cell and post-flow cell.

The pre-flow cell optical system is composed of lenses and apertures (typically 2 lenses and 1 aperture). Its main function is to focus the circular cross-section laser beam emitted by the laser source into an elliptical laser beam with a smaller cross-section, ensuring a normal distribution of laser energy. This allows cells passing through the laser detection zone to receive consistent illumination intensity, minimizing stray light interference to the greatest extent.

The post-flow cell optical system primarily consists of multiple sets of filters. The main function of the filters is to direct fluorescent signals of different wavelengths to different photomultiplier tubes.

VGT-209FT Flow Cytometer FilterUltrasonic CleanerMain Technical Parameters:

1,Pure Water Slow Pull Tank:

Inner Tank Dimensions: 280×390×250 (mm);

Structure and Function: Independent cleaning tank with a four-sided serrated overflow structure. Liquid enters through the inlet and overflows to the drain port for discharge. The top of the tank is equipped with heating tubes to provide a heat source, and an FFU blows air downward.

Heating System: Heating Power: 2kW; Temperature Control Range: Room temperature ~100°C.

2. Hot Air Drying Tank:

Inner Tank Dimensions: 500×450×350 (mm);

Structure and Function: Independent drying tank with a cavity structure. A high-pressure fan generates an air source, which is filtered to produce uniform hot air. The top of the tank has heating tubes to provide a heat source, and the door is an automatic pneumatic door.

Heating System: Heating Power: 6kW; Temperature Control Range: Room temperature ~120°C.

VGT-209FT Flow Cytometer FilterUltrasonicCleaner Equipment Features:

1. Compared to manual cleaning, it saves significant time, reducing the process by several hours.

2. It offers a more scientific and environmentally friendly cleaning function with strong operational performance.

3. It improves the pass rate of semi-finished products during the production process.

4. It has a long service life. With regular and proper maintenance, it can generally operate without failure for over five years and remain functional for over ten years.

5. The materials used are cost-effective and offer high value for money. It thoroughly cleans contaminants from the gaps of various workpieces.

VGT-209FT Flow Cytometer Filter Ultrasonic CleanerMaintenanceKey Points:

1. Check whether the liquid levels in each storage tank are within the specified range. After starting each circulation pump, observe the drop in liquid levels. If the liquid level in the first storage tank falls below 50mm from the heater, replenish the cleaning solution.

2. If the filter is clogged, the pressure gauge needle will move upward. Once the approximate standard is determined, replace the internal filter element.

3. The shaking mechanism should be lubricated every three months.

4. Regularly clean the surfaces of the heaters in each tank.

5. Periodically inspect and calibrate each temperature regulator.

6. Regularly clean the inside of the cold coils. Otherwise, scale may accumulate inside the pipes, reducing the pipe diameter and diminishing cooling efficiency.