Ultrasonic Cleaning Machine for Detection Sensing Filter VGT-1509FH

Detection Sensor Filter Ultrasonic Cleaning MachineVGT—1509FH

Detection Sensor Filter Product Description:

Detection sensor filters are widely used in online detection instruments for near-infrared optical systems.

They are applied in water quality analysis, toxic gas detection, laser rangefinders, atmospheric monitoring, gas detection, etc. They offer advantages such as high transmittance, high steepness, and high signal-to-noise ratio.

Detection Sensor Filter Ultrasonic Cleaning MachineEquipment Introduction:

VGT—1509FH Detection Sensor Filter Ultrasonic Cleaning Machine is a specialized device for cleaning optical glass before coating. Weigute designed and produced this ultrasonic cleaning machine based on user requirements and by incorporating the latest industrial technologies and experiences. The main materials and components are sourced from renowned Japanese and American manufacturers, ensuring precision manufacturing. It features a rational structure, stable and reliable operation, advanced technology, user-friendly operation, high cleanliness of workpieces, and drying capability after cleaning. It is primarily used for precision cleaning of high-cleanliness components like optical glass before coating.

Detection Sensor Filter Ultrasonic Cleaning Machine Product Features:

1. Uses Weigute's self-developed ultrasonic generator and ultrasonic transducer, providing strong and uniform ultrasonic waves, high mechanical Q value, stable performance, and long service life.

2. PLC control system: All parameters, including water inlet and drainage, cleaning temperature, cleaning time, drying time, filtration cycle time, and ultrasonic power, can be set and operated via the human-machine interface.

3. Filtration cycle system: Filtration precision is optional from 1-50μm, removing particles, sediments, suspended solids, and floating debris from the cleaning solution, improving cleaning agent utilization, and reducing cleaning costs.

4. Inner tank made of 304 stainless steel, resistant to acids and alkalis, with strong corrosion resistance.

5. The equipment is encased in high-quality stainless steel, with a 1.0mm thick electroplated powder-coated panel and an acrylic sliding door with a transparent observation window.

6. The entire process of loading and unloading baskets and moving baskets between tanks is automatically performed by a robotic arm.

7. Cleaning basket: The frame uses a round rod structure, with the sides and bottom made of welded stainless steel perforated plates, offering strong load-bearing capacity.

Detection Sensor Filter Ultrasonic Cleaning MachineEquipmentMaintenance:

1. Check whether the liquid levels in each storage tank are at the specified positions. After starting each circulation pump, observe the drop in liquid levels. If the liquid level in the first storage tank is 50mm below the heater, replenish the cleaning solution.

2. If the filter is clogged, the pressure gauge needle will move upward. After determining the approximate standard, replace the internal filter element.

3. The shaking mechanism should be lubricated every three months.

4. Regularly clean the surfaces of the heaters in each tank.

5. Regularly inspect and calibrate each temperature regulator.

6. Regularly clean the inside of the cooling pipes; otherwise, scale may form, reducing pipe diameter and cooling efficiency.