MG362X1ARF/Microwave Signal Generator
Other Products
Signal purity determines the quality of measurements in several applications, such as radar, transceivers, ADC/DAC, and component testing. Rubidium™ pushes the envelope of phase noise performance with its low and ultra-low phase noise options. Combined with first-class harmonic and spurious performance, the Rubidium Signal Generator delivers industry-leading overall signal purity performance, enabling customers to perform more accurate measurements.
The Rubidium MG362X1A offers atomic clock frequency stability with an internal Rubidium frequency reference option. Alternatively, customers can achieve superior frequency stability by calibrating the internal oven-controlled crystal oscillator (OCXO) reference using an external GNSS/GPS signal. Excellent frequency stability makes Rubidium an ideal signal generator for metrology and high-clock applications.
Rubidium's AM, FM/PM, pulse, and pulse train modulation capabilities allow for the generation of a wide range of complex analog modulated signals. FM/pulse modulation can be applied simultaneously to generate complex modulated waveforms, such as chirps. The signal generator includes built-in extensive signal simulation functions for pulse radar testing.
Rubidium is equipped with a 7-inch touchscreen and keyboard, along with a dial on the front panel. Four USB 3.0 ports on the front panel allow connection to various devices, such as memory devices and Anritsu's USB power sensors. Support for standard drivers such as IVI.NET and IVI-C, as well as SCPI commands, enables fast and efficient remote programming of Rubidium.
| Feature | Benefit |
| Very low phase noise, close-in |
|
| Atomic clock frequency stability and accuracy |
|
| Field level and frequency calibration |
|
| Very low harmonics and spurious |
|
| Quad pulse signal generation and pulse sweep |
|
| Range | Specification |
| Frequency Range | 9 kHz to 20/43.5 GHz/70 GHz, operable up to 72 GHz |
| Frequency Resolution | 0.001 Hz |
| Phase Offset | Adjustable in 0.1-degree steps |
| SSB Phase Noise | -136 dBc/Hz (typ) and -140 dBc/Hz (measured) @ 10 GHz output, 10 kHz offset |
| Internal Time Base Stability - Aging | <±2 x 10e-8 per year, Option 3 <±1 x 10e-9, Option 56 |
| Reference Frequency Input/Output | 10 MHz, 100 MHz, and 1.6 GHz |
| Output Power | -130 dBm to +20 dBm (MG36221A standard output, with Option 2) -130 dBm to +16 dBm (MG36241A, standard output, with Option 2) -90 dBm to +6 dBm (MG36271A, standard output, with Option 2) |
| Level Accuracy and Flatness | ±1.4 dB (MG36221A/MG36241A) ±2.5 dB (MG36271A) |
| Harmonics (20/43.5/70 GHz) | -58 dBc (MG36221A) -55 dBc (MG36241A and MG36271A) |
| Subharmonics | -83 dBc (MG36221A and MG36241A) -63 dBc (MG36271A) |
| Non-Spurious (20/43.5/70 GHz) | -63 dBc |
| Modulation | AM, FM, PM, Pulse, and Pulse Train |
| Pulse Modulation: Minimum Pulse Width | <50 ns (unupgraded) |
| Pulse Modulation: Rise/Fall Time | 5 ns (typical) |
| LF Signal Generator Waveforms | Sine, Square, Pulse, Triangle, Ramp, GN/UN Noise |
| Frequency Sweep Mode | Step, List, Analog (only MG36221A and MG36241A) |
| Frequency Sweep Width | 9 kHz to full frequency range (Step, List) 100 MHz to full frequency range (Analog) |
| Power Sweep | Step and List |
| Power Sweep Resolution | 0.01 dB/step |
| Option | Description |
| MG362X1A-0001 | Rack Mount with Slides (cannot be ordered with Option 11) |
| MG362X1A-0002 | Mechanical Step Attenuator, 110 dB (MG36221A/MG36241A) Mechanical Step Attenuator, 90 dB (MG36271A) |
| MG362X1A-0003 | Low Phase Noise and High Stability (required for Option 13) |
| MG36221A-0006 | Analog Sweep, Frequency |
| MG36241A-0006 | Analog Sweep, Frequency |
| MG362X1A-0009 | Rear Panel K (M) Connector RF Output (for MG36221A and MG36241A) |
| MG362X1A-0010 | User-Defined Modulation (requires Options 12, 26, and 27) |
| MG362X1A-0011 | Rack Mount without Slides (Rack Mount Bracket) |
| MG362X1A-0012 | Amplitude, Frequency, and Phase Modulation, Internal/External (requires Option 27) |
| MG362X1A-0013 | Ultra-Low Phase Noise (requires Option 3) |
| MG362X1A-0015 | High Power Output |
| MG362X1A-0018 | Field User-Level Calibration (requires 2000-2166-R accessory kit and MA243X0A USB power sensor, sold separately) |
| MG362X1A-0023 | Advanced Phase Noise, CW (requires Options 3 and 13) (available only on MG36221A models) |
| MG362X1A-0025 | Pulse Train Modulation (requires Options 26 and 27) |
| MG362X1A-0026 | Pulse Modulation, Internal/External (requires Option 27) |
| MG362X1A-0027 | Modulation Hardware (required for Options 12, 26, or both to function) |
| MG362X1A-0029 | Front Panel Modulation Input/Output Access (requires Option 27) |
| MG362X1A-0030 | 600 Ohm External AM/FM Input Impedance (requires Options 12 and 27) |
| MG362X1A-0033 | Phase Noise, Export Option (cannot be ordered with Options 3, 13, 23, or 56 for MG36221A. Cannot be ordered with Options 3, 13, or 56 for MG36241A or MG36271A.) |
| MG362X1A-0037 | Removable SDIO Memory |
| MG362X1A-0056 | Ultra-Stable Time Base (requires Option 3 or 13) |
| MG362X1A-0066 | GNSS Atomic Clock Receiver (requires Option 3 or 13) |
| MG362X1A-0097 | Accredited Calibration to ISO17025 and ANSI/NCSL Z540-1, including calibration certificate, test report, and uncertainty data |
| MG362X1A-0098 | Standard Calibration to ISO17025 and ANSI/NCSL Z540-1, including calibration certificate |
| MG362X1A-0099 | Advanced Calibration to ISO17025 and ANSI/NCSL Z540-1, including calibration certificate, test report, and uncertainty data |
The X designation varies by model.
| Industry Category | Measurement-Analysis-Instruments |
|---|---|
| Product Category | |
| Brand: | 安立Anritsu |
| Spec: | |
| Stock: | |
| Origin: | China / Beijing / Tongzhouqu |
