ECS-7000MR Hot Water Circulation Pump Centralized Energy-Saving Controller

Building Equipment Energy-saving Control and Management System

1. Design Basis

GB 50736-2012 "Design Code for Heating, Ventilation and Air Conditioning of Civil Buildings"

CB 50189-2015 "Energy Efficiency Design Standard for Public Buildings"

GB 50034-2013 "Standard for Lighting Design of Buildings"

GB/T 26759-2011 "Technical Specification for Energy-saving Control Devices of Central Air Conditioning Water Systems"

GB 50378-2019 "Assessment Standard for Green Buildings"

GB 51348-2019 "Standard for Electrical Design of Civil Buildings"

JGJ/T 229-2010 "Green Design Standard for Civil Buildings"

GB/T 18883 "Indoor Air Quality Standard"

JGJ/T 461-2019 "Design Standard for Indoor Air Quality Control in Public Buildings"

System Configuration:

Cold and Heat Source Centralized Control Energy-saving Controller ECS-7000MZK

Unit Protocol Gateway ECS-7000WG

Refrigeration Unit Energy-saving Controller ECS-7000MLS

Chilled Water Circulation Pump Group Controller ECS-7000MD

Cooling Water Circulation Pump Group Controller ECS-7000MQ

Cooling Tower Centralized Control Energy-saving Controller ECS-7000MT

Hot Water Circulation Pump Centralized Control Energy-saving Controller ECS-7000MR

Water Pump Energy-saving Controller ECS-7000MB

Water Flow Switch YK-FG

Water Pipe Pressure Sensor YK-P-800/1.0

Water Pipe Temperature Sensor YK-W-TG-100

Flow Meter YK-ETFMI

Outdoor Temperature and Humidity Sensor YK-THO

Network Controller YK-TCP/L1

System Host and Software ECS-7000S

For more product information and pricing, please call our company.

Contact: Manager Wu

Phone: 13891834587 (same number for WeChat)   

Q   Q: 407693430

Email: 407693430@qq.com

System Function Description:

2. The system adopts intelligent equipment integrating power distribution, control, energy saving, safety alarms, and fieldbus communication.

It efficiently monitors and manages the building's air conditioning/fresh air units, ventilation and exhaust, water supply and drainage, elevators, lighting, and other electromechanical equipment.

The system uses energy-saving control strategies and fieldbus technology to reduce the operating energy consumption of building electromechanical equipment.

3. Air Conditioning/Fresh Air Unit System

Monitors the actual electrical power of the unit, supply and return air temperature, and CO2 concentration.

Automatically adjusts the cold/hot water valve and fresh/return air damper opening to effectively control the system's fresh/return air ratio, total fresh/return air volume, cold/hot water flow, and fan efficiency under different seasons and operating conditions.

4. Ventilation, Exhaust, and Smoke Exhaust Combined with Ventilation Fans

Ventilation and exhaust fans monitor the actual electrical power of the fan. The fan and fire damper are interlocked for startup. Energy-saving operation of the fan is automatically controlled by the controller through intermittent operation, local exhaust, and CO concentration in the basement.

Smoke exhaust combined with ventilation fans prioritize fire protection. When a fire alarm signal is input, they automatically switch to high-speed operation and stop other ventilation and exhaust fans.

For supply and exhaust fans in equipment rooms, refer to the HVAC control requirements.

5. Water Supply and Drainage System

Automatically controls pump start/stop based on corresponding liquid level signals, automatically selects start/stop pumps based on cumulative operating time, motor protection, energy efficiency evaluation, and energy-saving control. For related control requirements, refer to the power system diagram.

6. Elevator System

Monitors the operating, fault, ascending, descending, and other statuses of the elevator system.

7. Public Lighting

Schedule control.

Monitors indoor illuminance and human movement to control the number of lighting circuits turned on in the area.

On-site, intelligent lighting scene control panels can be set to control various three-dimensional combinations of on-site lighting in terms of angle, brightness, color, etc., meeting the needs of lighting scenes in different periods and occasions.

8. Building Equipment Energy-saving Control and Management System Software

The software monitors and controls the operating conditions and efficiency of building electromechanical equipment in real time.

Data such as related equipment operation and fault information are summarized and stored in the system database.

It features data security protection with different levels of passwords and centralized graphical interface for effective monitoring of electromechanical equipment and environmental parameters.

Based on the building's operational history, it manages and analyzes current and past operational processes, generating trend reports.

9. The system platform has multiple standard output interfaces such as TCP/IP, MODBUS, and RTDS real-time database.

10. The system uses peer-to-peer communication and has bus fault status monitoring function. When the central operating station stops working, controlled devices on-site can achieve interoperability and local control.

11. The Building Equipment Energy-saving Control and Management System shall be implemented only after detailed design based on final drawings is approved by the design institute.