3051 Pressure Transmitter

The 3051 Intelligent Pressure Transmitter is a new type of intelligent instrument developed by our factory using internationally advanced technology in collaboration with multiple domestic technical forces. This instrument utilizes microprocessor technology for temperature compensation and nonlinear compensation, significantly improving measurement accuracy, enhancing temperature characteristics, expanding the range ratio, and adding intelligent configuration functions to further meet the high reliability and stability requirements of industrial field instruments. Key components and parts are imported, and the entire unit undergoes strict testing before leaving the factory. It features advanced design principles, reliable product quality, a complete range of specifications, and easy installation and use.

Product Parameters

Output Signal: DC4-20mA + HART Protocol

Output Mode: Linear Output, Square Root Output (remotely adjustable via configuration software)

Measurement Range: Rated Range 0-0.125~1.6KPa, 0-1.3~8KPa, 0-6.2~40KPa, 0-31.1~250KPa

Single-End Maximum Static Pressure 6MPa, 8MPa, 10MPa, 10MPa

Rated Range 0-0.117~1MPa, 0-0.345~2.5MPa

Single-End Maximum Static Pressure 10MPa, 13MPa

Zero and Span: Adjustable via local span and zero buttons or remotely via HART handheld intelligent terminal.

Zero Positive and Negative Shift: For negative zero shift, the lower range limit must be greater than or equal to -URL; for positive zero shift, the upper range limit must be less than or equal to +URL. The calibrated range must be greater than or equal to the minimum range.

Damping Time Constant: Time constant is adjustable in increments of 0.1 seconds, from minimum to 32 seconds. If damping time is 0, it defaults to 0.1.

Environmental Temperature Limit: Standard Type -40 to 85°C, LCD Head -20 to 70°C

Process Temperature Limit: -40 to 104°C

Storage Temperature Limit: -40 to 85°C

Environmental Humidity: 0-95% Relative Humidity

Volume Change: Less than 0.01in (0.16cm)

(Zero reference calibration range, under reference conditions, silicone oil filled, 316L stainless steel isolation diaphragm)

Accuracy: Range Ratio <5:1: ≤+0.1% FS, Range Ratio ≥5:1: ≤+0.25% FS

Stability: 6 months, ±0.5% URL

Environmental Temperature Influence: -29 to 85°C Zero Error: 0.5% URL/56°C, Total Error: <0.5% URL + 0.2% Calibrated Range)/56°C

Vibration Influence: On any axis, vibration influence at 200Hz is 0.2% URL/g

Power Supply Range: 12 ~ 36VDC

Intrinsic Safety Explosion-Proof: Exia IICT6Ga Note: Intrinsic safety must be powered via a safety barrier or intrinsic safety power supply.

Installation Position Influence: Zero drift is at most ±0.25KPa. All zero drift can be corrected; no impact on span.

Load Influence: No load influence unless the power supply voltage changes.

Load Characteristic: Current Load ≤ (Us-12) + 0.02 (Us = Supply Voltage) Ω

Working Principle

The intelligent circuit board uses advanced integrated circuits and SMT technology, integrating conversion circuits and processing circuits onto a single board.

The transmitter's microprocessor controls the operation of the A/D and D/A conversion modules while also performing digital communication and self-diagnostic functions. During operation, the microprocessor controls the A/D conversion module to sample and convert analog signals from the sensing element into digital signals.

The microprocessor processes the digital signals, including signal linearization, temperature compensation, and engineering unit conversion. The microprocessor can also perform sensor characterization, range setting, damping time adjustment, and other functions. EEPROM stores all configuration and fine-tuning parameters. Since the memory is non-volatile, stored parameters are not lost after power-off.