PT124-30MPa-M14

PT124-30MPa-M14 Extruder Pressure Sensor, PT124 Melt Pressure Sensor Features:   Rigid rod, hose isolation, diaphragm isolation structure, standard diaphragm is a corrugated diaphragm coated with titanium nitride, corrosion-resistant and wear-resistant, good stability and accuracy; rigid rod and flexible hose connection, electrical interface adopts explosion-proof structure design, wear-resistant pressure-sensing diaphragm isolation structure, pressure-sensing diaphragm is thickened and heat-treated, high-temperature melt pressure sensor PT124 melt pressure sensor can be used interchangeably with similar imported high-temperature melt pressure sensor products such as  Dynisco  GefranDingli.   In extrusion production lines, the high-temperature melt pressure sensor PT124 melt pressure sensor plays an important role in improving melt quality, enhancing production safety, and protecting production equipment. The high-temperature melt pressure sensor PT124 melt pressure sensor is used for the measurement and control of high-temperature melt pressure in high-temperature melt extrusion equipment such as rubber machinery and plastic extrusion machinery.   PT124 Melt Pressure Sensor Main Technical Parameters:     1. Range: 0--100MPa  ;   2. Overall Accuracy: 0.5%FS  ; 1%FS     3. Output Signal: 2mV/V  ; 3.33mV/V  ;   4. Supply Voltage: 10VDC  ;   5. Diaphragm Temperature Resistance: 450℃;   6. Electrical Connection: Five-core aviation connector  5  pin  ;   7. Connection Thread: M14×1.5 (Standard)  ; M18×1.5  ; Special design interchangeable 1/2-20UNF.     Model Selection: PT124-30MPa-M14*1.5-152/460;        PT124-25MPa-M14*1.5-152/470