BTA Deep Hole Drilling Cutting Oil for Three-Axis and Five-Axis Vertical and Horizontal Machining

810 Series Deep Hole Drilling Cutting Oil Technical Specifications

I. Product System Architecture

Model Base Oil Type Applicable Machining Depth Extreme Pressure Value (PB/N)*810* Mineral Oil Base ≤3**00810** Synthetic Oil Base *D-5**000*RK-810*P*O Full Synthetic Oil Base ≥5*1*00

II. Technological Innovation

Composite Additive System

Sulfur-Phosphorus-Nitrogen Extreme Pressure Agent (Sulfur Content 0.8-1.*wt%)
Nano Borate Anti-Wear Agent (Friction Coefficient ≤0.08)

Thermal Management Performance


Thermal Conductivity: 0.1*2W/(m·K) (AST* *7896)
Specific Heat Capacity: 1.8*kJ/(kg·K)
III. Typical Application Validation

[Titanium Alloy Machining Case]
Tool Life: D*K-810* Increased Φ6m* Gun Drill Life from 35* to 82*
Surface Roughness: Ra Value Stabilized in the 0.8-1.6μm Range
IV. Operating Parameter Guidance

Flow Control:

Gun Drill: 0.3-0.5*/min·mm (Hole Diameter)
B*A Drill: 1.2-1.*L/min·mm (Hole Diameter)
V. Technical Certification
Passed N*DC*P Special Process Certification
*