C-MAX C-1000DA 120PSI Pneumatic Actuator

C-MAX C-1000DA 120PSI Pneumatic Head Valve Cylinder from Taiwan Province, China, manufactured by CHUNG HORNG ENTERPRISE CO., LTD., is a pneumatic actuator powered by compressed air. It utilizes the linear motion of a piston rack to drive the gear transmission of the output shaft, providing angular stroke output. Available in both double-acting and single-acting types, it is widely used for the switching and regulation of angular stroke valves such as ball valves, butterfly valves, and plug valves. It is also suitable for other rotary applications, making it an ideal device for industrial pipeline automation control.

SHEN KANG TAICHUNG TAIWAN adopts a double-piston gear rack design, featuring a compact structure, symmetrical installation positions, easy reversal of output shaft direction, long service life, and rapid operation. The back of the piston rack is equipped with composite bearings and guide rings, ensuring smooth operation, low friction coefficient, and extended service life.

Product models include:

Double-Acting

C-125DA

C-250DA

C-450DA

C-1000DA

C-2250DA

C-3650DA

C-5000DA

C-11000DA

Single-Acting

C-250SR2/3/4/5/6

C-450SR2/3/4/5/6

C-1000SR2/3/4/5/6

C-2250SR2/3/4/5/6

C-3650SR2/3/4/5/6

C-5000SR2/3/4/5/6

C-11000SR2/3/4/5/6

The C-MAX C-1000DA 120PSI Pneumatic Head Valve Cylinder is primarily used to control various pipelines and equipment. It operates in two modes: pneumatic and electric, and can be installed at the top or bottom of pipelines. It enables the connection or disconnection of valves or regulators under air pressure to control fluid media. The double-acting pneumatic actuator has two operating modes: direct-acting and reverse-acting. Direct-acting refers to the piston inside the actuator pushing the piston in the double-acting cylinder when air pressure is applied, causing the piston rod to extend and actuate components such as valve discs or regulators to achieve opening or closing. Reverse-acting refers to the piston returning to its original position under spring force when air pressure is disconnected, causing the piston rod to retract and actuate components to achieve connection or disconnection. Normally open and normally closed are the two types of double-acting pneumatic actuators. Double-acting pneumatic actuators offer advantages such as simple structure, lightweight, and ease of operation, making them suitable for various automation control systems.