TM107SF-30T Servo CNC Hydraulic Press

XTM107SF-30T Servo Hydraulic Press

I. Equipment Brief Overview

1. Equipment Name:    CNC Servo Hydraulic Press

2. Equipment Model:    XTM-107SF-20T

3. Force Range: 5-20 tf (ton-force), adjustable

4. Stroke:    300mm, adjustable

5. Function:  Fastener pressing and detection

6. Power Source: Fluid pressure at 17 MPA, total power 6 KW

7. Structure:    Single-column C-frame structure

II. Description of CNC Servo Hydraulic Press：

1: Control System:

The CNC system of this equipment is developed using configuration software, with a high-color configuration touch screen as the interface, forming a human-machine dialogue window that greatly facilitates users to intuitively input and call production parameters, and monitor on-site production process data including equipment status. The control system uses products from the international brand Mitsubishi Electric Corporation, effectively ensuring operational reliability, stability, and versatility of the equipment.

2: Operating Principle

The equipment drives the cylinder for up and down pressing operations through the CNC hydraulic system. It interfaces with the human-machine interface operation window, allowing customers to set pressing parameters for their products on the configuration touch screen, visually monitor pressing data, and perform online pressing detection. The equipment features multi-stage pressing speed control including rapid descent, pressing, pressure holding, and return, ensuring effective pressure and displacement accuracy during the pressing process.

3: Working Conditions

1. Working Environment: Ambient temperature -10~45°C, relative humidity 40~80%

2. Power Supply: AC380V (±10%), frequency 50HZ (±1HZ), three-phase five-wire

3. Hydraulic Working Pressure: 17 MPA, continuous oil temperature not exceeding 50°C at 35°C room temperature

4. Use No. 46 high-quality hydraulic oil

4: Operational Efficiency

1. Theoretical Rapid Descent Speed of Slide: 180 MM/S         

2. Theoretical Working Feed Speed of Slide: 5-20 MM/S adjustable

3. Theoretical Ascent Speed of Slide: 160 MM/S  

5: Equipment Advantages

①.Energy Saving: The equipment uses a servo hydraulic control system, saving approximately 70% electricity compared to conventional hydraulic presses, with an hourly power consumption of about 1.2 KW.

②.Environmental Protection: The equipment features low noise and low oil temperature, with noise effectively controlled within 60 decibels. It includes an air cooling device that automatically activates when the oil temperature exceeds 40°C.

③:High Precision: The equipment uses servo motors and servo pumps to control overall operation, allowing adjustment of pressing stroke and speed according to product requirements. Pressure repeat accuracy is within 1%, and position repeat positioning accuracy is within ±0.05mm.

④：Efficiency: The equipment has a rapid descent speed of 180mm/s (adjustable), working feed speed of 5-20mm/s (adjustable), and return speed of 160mm/s (adjustable). On average, it completes one pressing cycle in 3.5S-4S (with 0.5S pressure holding).

Safety: An emergency stop button and safety protection light curtain are installed at the front of the machine. In case of malfunction, the operator can press the emergency button to stop the machine immediately. If the operator's hand enters the machine during operation, the machine stops instantly, ensuring operator safety.

III; Equipment Functions;

(1)Touch Screen Functions

1. Operation Interface: Displays current pressing force, real-time displacement, daily production output, current equipment status, various parameter settings, and fault alarms.

2. Parameter Settings: Pressure holding time, upper and lower limit positions of the slide, working feed position, equipment force output, light curtain status, equipment operating speed, pressing force detection settings, idle shutdown time, etc.

3. Auto/Manual Switch Button (on the side of the touch screen installation box: power indicator, power switch, equipment reset, three-color indicator light, alarm buzzer) and other buttons.

4. Capable of storing customized control processes for different products; able to display force-displacement pressing curves. Can store force and displacement detection data generated during the pressing process and export data directly in EXCEL format; can connect to a printer to directly print touch screen data.

Servo hydraulic press applications in the automotive industry: engine component pressing (cylinder head, cylinder liner, oil seal, etc.), steering gear component pressing (gears, pins, etc.), transmission shaft component pressing, gearbox component pressing, brake disc component pressing, etc.