Dolomite Calcium Oxide Testing Equipment

Dolomite Calcium Oxide Testing Equipment Dolomite Calcium Oxide Testing Equipment

, Preparation Work

1. Instrument Inspection: Before starting the analysis, inspect the equipment, including whether the power connection is normal, whether all components are securely installed, and whether the optical system is clean.

2. Calibrate the Instrument: Using standard materials for calibration is a key step to ensure measurement accuracy. According to the instrument manual, select appropriate standard samples and follow the specified procedures for calibration to eliminate systematic errors.

3. Prepare Samples: The quality of sample preparation directly affects the analysis results. Typically, the sample to be tested needs to be crushed to a certain particle size, and impurities removed through sieving. For solid samples, it may also be necessary to convert them into a form suitable for analysis, such as melting into glass discs or pressing into pellets.

II. Sample Loading and Setup

1. Load Samples: Place the processed sample into the sample cup, ensuring the surface is flat and free of bubbles. If using powdered samples, avoid overfilling to prevent affecting the analysis results.

2. Parameter Setting: Based on the sample characteristics and analysis requirements, set the corresponding measurement parameters on the instrument, including excitation conditions (voltage, current), measurement time, detector type, etc. Different types of samples may require different optimized parameter settings to achieve accurate analysis results.

III. Perform Analysis

1. Start Analysis: After confirming all settings are correct, press the start button to begin the analysis process. During this period, maintain a stable surrounding environment to avoid vibrations or other interfering factors that could affect measurement accuracy.

2. Data Recording: During the analysis, the instrument will display the detected data in real time. Be sure to record this information in detail, including sample number, measurement date, condition parameters, and raw readings, for subsequent analysis reference.