Automotive Test Environment Simulation Chamber

To meet the environmental simulation system provided for vehicle testing, it includes the treatment of temperature, humidity, air pressure, air quality, etc., and can also simulate wind, frost, rain, snow, light, fog, sand and dust, etc. It can provide conventional test chambers, altitude test chambers, wind tunnel laboratories, etc.

Automotive Environmental Chamber Temperature Control Test

(1) Temperature range: -40℃~80℃

(2) Temperature accuracy: When the vehicle is stationary, the air temperature uniformity in the chamber is maintained at ±2℃. When subjected to the thermal load impact of the test vehicle, it can be stably controlled within the set temperature. The air temperature fluctuation at the control point 0.5 meters in front of the vehicle is <±1℃, and at general control points, the air temperature fluctuation is <±2℃. There is no condensation on the chamber walls within the temperature range of -40℃ to 60℃.

(3) Emission test: Temperature (H) 5.5 ≤ H ≤ 12.2g H2O/kg air

(4) During Euro 3/4 Type VI test: The humidity in the chamber should be sufficiently low throughout the test to prevent water condensation on the chassis dynamometer roller.

(5) During temperature changes: No frost formation.

(6) Performance test: When the air temperature in the test chamber is 25℃, the relative humidity is 50% RH ±5%.

Environmental Chamber Test Load Range

(1) Maximum overall vehicle dimensions: 7000*2200*2100mm, customizable as required.

(2) Maximum equipped vehicle weight: 4000 KG

(3) Maximum engine power: 300 KW

(4) Maximum vehicle air intake: 720 m³/h

(5) Maximum vehicle exhaust volume: 3200 m³/h, with exhaust pipe outlet temperature up to 350℃