TA2 Titanium Rod (GR2 Corrosion-Resistant Titanium Rod)

TA2 Titanium Rod Petrochemical Titanium Rod GR2 Corrosion-Resistant Titanium Rod (Executing National Standard) standards, material, technology, and application details are as follows:

TA2 Titanium Rod Common Standards:

Domestic: GB/2965-2007, GB/T13810-2017

American Standards: ASTM B348, ASTM F136, ASTM F67, AMS 4928

TA2 Titanium Rod Common Grades

Domestic Grades: TA1, TA2 (Industrial Pure Titanium) TA10

American Standard Grades: GR1, GR2, GR12

Customized according to customer-provided specifications

TA2 Titanium Rod Manufacturing Process:

Hot Forging - Hot Rolling - Annealing and Straightening - Turning (Polishing) - Polishing - Facing - Inspection - Packaging

Pure Titanium Rod Specifications:

Diameter 3mm-280mm*L, customizable according to customer-provided specifications

Pure Titanium Rod Delivery Condition:

Hot Worked Condition/R, Cold Worked Condition/Y, Annealed Condition/M, Solution Treated Pure Titanium Rod

Surface Treatment:

Polished or Turned

TA2 Titanium Rod Surface Quality:

High precision, good finish, no oxide layer, pitting, no cracks, folds, rolling folds, scars, delamination, hairline cracks, or other defects.

Pure Titanium Rod Surface Finish:

Clean, dust-free, better acid resistance and service life.

Pure Titanium Rod Physical Properties:

Better elongation and strength properties.

Pure Titanium Rod Testing:

Physical property testing, hardness testing, chemical composition testing.

TA2 Titanium Rod Technical Requirements:

1. The chemical composition of titanium and titanium alloy rods shall comply with GB/T 3620.1. When re-inspection is required, the allowable deviation of chemical composition shall comply with GB/T 3620.2.

2. The diameter or side length of hot-worked rods and their allowable deviations shall comply with the relevant regulations.

3. The diameter tolerance of hot-worked and then turned (polished) rods, as well as cold-rolled and cold-drawn rods, shall comply with industry regulations.

4. The out-of-roundness of hot-worked and then turned (polished) rods shall not exceed half of their dimensional tolerance.

TA2 Titanium Rod Applications:

Mainly used for stamping parts and corrosion-resistant structural components, such as aircraft frames and skins, engine accessories, seawater corrosion-resistant pipelines, valves, and pumps. Desalination system components, chemical heat exchangers, pump bodies, distillation columns, coolers, agitators, tees, impellers, fasteners, ion pumps, compressor valves, diesel engine pistons, connecting rods, leaf springs, etc. In addition to traditional applications in aerospace, medical, and other fields, in recent years, it has also been involved in high-end kitchen cabinets, such as antibacterial sinks and baby bowls.