Fluorosilicon Nano Anti-Corrosion Coating Fluorosilicon Nano Surface Sealer

Color Appearance: Milky white nano aqueous emulsion

Solid Content: 50%±1

pH Value: 7~9

II Product Characteristics

Fluorosilicone nano waterproof coating topcoat is a non-toxic, odorless, non-flammable, and non-volatile nano emulsion. When diluted with water at a ratio of 1:15, the product penetrates into the capillary pores of architectural coatings, forming a colorless and transparent waterproof layer. This creates a breathable and hydrophobic invisible protective layer on the exterior coating, allowing internal moisture to evaporate while preventing external rainwater from penetrating. It exhibits a lotus leaf-like hydrophobic effect, providing waterproofing, dust resistance, and corrosion protection, thereby enhancing the lifespan and performance of the coating.

III Product Application

Waterproof topcoat and stain-resistant waterproofing for architectural coatings.

IV Usage Method

1. The substrate must be dry, clean, and free from dust, oil stains, and other contaminants.

2. Dilute directly with water at a ratio of 1:15. Apply evenly by spraying or brushing twice using the "wet-on-wet" method. Allow to dry for 24 hours before inspection. Avoid contact with water and oil within 24 hours, as it may affect the performance.

3. One liter of diluted solution can cover 5-10 square meters, depending on the porosity of the substrate.

V Storage and Transportation

1. Storage temperature: Above 0°C, store in a cool and ventilated place.

2. Product shelf life: Over 36 months.