Single Channel 20G Analog Signal Source SMA100B Configuration

20G Analog Signal Source Rohde & Schwarz SMA100B Single Channel

SMA100B Signal Source Frequency Options:

SMAB-B103 Option: 8kHz to 3GHz

SMAB-B106 Option: 8kHz to 6GHz

SMAB-B112 Option: 8kHz to 12.75 GHz

SMAB-B120 Option:  8 kHz to 20 GHz

SMAB-B131 Option: 8kHz to 31.8 GHz

SMAB-B140 Option: 8 kHz to 40 GHz

SMAB-B140N Option: 8kHz to 40 GHz, minimum pulse width limitation

SMAB-B150 Option: 8 kHz to 50 GHz

SMAB-B150N Option: 8kHz to 50 GHz, minimum pulse width limitation

SMAB-B167 Option: 8 kHz to 67 GHz

SMAB-B167N Option: 8 kHz to 67 GHz, minimum pulse width limitation

SMAB-B29 Option: Differential Clock Synthesizer, 3GHz

SMAB-K722 Option: Clock Synthesizer Frequency Extendable to 6 GHz

Rohde & Schwarz SMA100B RF and Microwave Signal Generator:

SMA100B Signal Source Key Features:

Frequency Range: 8 kHz to 3, 6, 12.75, 20, 31.8, 40, 50, and 67 GHz (up to 72 GHz in over-range mode)

SSB Phase Noise: –132 dBc at 10 GHz, 10 kHz offset (typical)

Wideband Noise: –162 dBc at 10 GHz, 30 MHz offset (measured)

Maximum Output Power Exceeds 30 dBm Over a Wide Frequency Range

Very Low Harmonics

Outstanding Leading Performance

The SMA100B RF and microwave signal generator delivers superior performance. It provides a clean output signal while maintaining the highest output power and lowest harmonics, outperforming similar products. As a globally leading signal generator, it can perform rigorous module and system testing and measurement tasks in RF semiconductors, wireless communications, aerospace, and defense fields.

Superior Signal Ensures Superior Equipment

The SMA100B offers unique and superior performance.

It provides a clean output signal while maintaining high output power and low harmonics.

Frequency range from 8kHz to 67 GHz (up to 72 GHz in over-range mode)

Extremely low SSB phase noise, -132 dBc at 10 GHz, 10 kHz offset (typical) Almost no wideband noise, -162 dBc at 10 GHz, 30 MHz offset (measured) Maximum output power exceeds 30 dBm over a wide frequency range

Low harmonics

Advanced graphical user interface with touch display

Exceptionally High Output Power

Large dynamic range, excellent level accuracy, superior level repeatability

Microwave frequency ranges often require high output power due to increased attenuation at higher frequencies. The SMA100B provides different output power levels to compensate for such losses, eliminating the need for downstream external amplifiers. Output power is very high (measured)

Up to 38 dBm high output power with 6GHz instrument

Over 30 dBm at 18 GHz and over 28 dBm at 20 GHz with 20 GHz instrument

Over 30 dBm in the 20 GHz to 36 GHz range with 40 GHz instrument

Over 22 dBm in the 40 GHz to 65 GHz range with 67 GHz instrument

Perfect in Every Detail, User-Friendly

Easy integration into test systems, innovative operational features

Flexible 2HU or 3HU housing

3HU with 7" large display and multiple front panel connectors 

Ergonomic touchscreen graphical user interface

Common menu items can be added to the user menu for quick and simple access to all necessary settings from a single menu

The SMA100B also includes an SCPI macro recorder with code generator, automatically recording manual settings and creating executable MATLAB

LegacyPro: Upgrade Technology

Refurbish old signal generators

LegacyPro enables the SMA100B to reliably simulate traditional generators from Keysight, Agilent, HP, Anritsu, and Rohde & Schwarz. Thus, the SMA100B can be deployed in traditional systems without extensive software changes, effectively extending uptime, reducing ownership costs, and prolonging the service life of test systems.

High-End ADC and DAC Component Testing

Measure the true performance of equipment

Each new generation of ADCs increases analog input bandwidth and required clock frequencies. Higher effective bits also lead to increased signal-to-noise ratio. This means testing ADCs and DACs requires ultra-pure high-frequency signals that exceed the performance of the device under test. The SMA100B's excellent performance optimizes the device under test and makes technological improvements feasible.

NRP Power Probe Connectivity

NRP power probes can connect to the SMA100B;

The device under test is rarely directly connected to the generator. The generator and device under test are usually interconnected via cables and other components. Thus, the reference plane shifts from the generator's RF output to the device under test. NRP power probes can connect to the SMB100B for accurate calibration at the new reference plane (accuracy up to 0.1dB).

SMA100B Signal Generator Phase Noise Performance Options:

SMAB-B709 Option: Low phase noise, for SMAB-B106/-B112/-B120/-B131/-B140(N)/-B150(N)/-B167(N)

SMAB-B710 Option: Improved close-in phase noise, for SMAB-B106/-B112/-B120/-B131/-B140/-B150/-B167

SMAB-B710N Option: Improved close-in phase noise, for SMAB-B103

SMAB-B711 Option: Ultra-low phase noise, for SMAB-B106/-B112/-B120/-B131/-B140/-B150/-B167

SMAB-B711N Option: Ultra-low phase noise, for SMAB-B103

SMA100B Signal Generator Reference Oscillator Options:

SMAB-B1H Option: High-performance OCXO reference oscillator

SMAB-K703 Option: 100 MHz, 1 GHz reference input and output

SMAB-K704 Option: Flexible reference input, 1MHz to 100 MHz

SMA100B Signal Generator Output Power Options:

SMAB-K31 Option: High output power, 3 GHz/6 GHz

SMAB-B32 Option: Ultra-high output power, 3 GHz/6 GHz

SMAB-K33 Option: High output power, 12.75 GHz/20 GHz

SMAB-B34 Option: Ultra-high output power, 12.75 GHz/20 GHz

SMAB-B35 Option: High output power, 31.8 GHz/40 GHz

SMAB-K36 Option: Ultra-high output power, 31.8 GHz/40 GHz

SMAB-B36S Option: Ultra-high output power, 31.8 GHz/40 GHz

SMAB-B37 Option: High output power, 50 GHz

SMAB-K38 Option: Ultra-high output power, 50 GHz

SMAB-B39 Option: High output power, 67 GHz

SMAB-K40 Option: Ultra-high output power, 67 GHz

20G Analog Signal Source Rohde & Schwarz SMA100B Single Channel