Aviation Kerosene Fine Filter

Our factory produces and supplies filter separators, oil-water separators, and oil-water separators for jet fuel year-round. We offer a complete range of specifications and models suitable for various industries, with low prices and reliable quality. Inquiries and consultations via letter or phone are welcome. Specific specifications are shown in the table below, and customization is available. Filter Structure and Working Principle: 1. Structure The filter separator is a metal housing containing a primary filter element (coalescing filter element) and a secondary filter element (separation filter element). It is equipped with manual and automatic vent valves (upon customer request), stainless steel drain valves, differential pressure gauges, direct-reading differential pressure meters (upon customer request), online sampling probe valves, sampling connectors, safety valves (upon customer request), water level sight glasses (upon customer request), heating devices (for customers in cold regions), and other accessories. 2. Working Principle When jet fuel enters the filter separator, it first collects in an aluminum tray and then disperses into the coalescing filter element from the inside out. The first step involves the filtration layer removing solid impurities; the second step passes through the demulsification layer to separate emulsified oil and water; the third step uses the coalescing layer to aggregate tiny water droplets into larger ones, which settle into the water collection tank. Then, any remaining small water droplets that have not coalesced are further separated by the hydrophobic action of the separation filter element and settle into the sedimentation tank, where they are discharged through the drain valve. Clean fuel passes through the separation filter element, collects in the secondary tray, and is discharged from the outlet of the filter separator. 3. Service Life The working status of the filter separator and the service life of the filter elements are primarily determined by the differential pressure. When the inlet-outlet differential pressure reaches 0.1 MPa (1.0 kg/cm²), it indicates that the coalescing filter element is clogged and should be replaced. Additionally, if the coalescing filter element has been in use for more than six months, replacement should be considered. The separation filter element is a permanent-type element and can be used long-term if there is no mechanical damage. However, when replacing the coalescing filter element, it should be disassembled for cleaning and inspection.      Partial Filter Separator Specifications Table: Product Model    Rated Flow m³/h    Rated Pressure MPa    Inlet-Outlet Diameter DNmm    Remarks 80LG-30/1.0 80LG-30/1.6    30    1.0 1.6    80     100LG-45/1.0 100LG-45/1.6    45    1.0 1.6    100     100LG-60/1.0 100LG-60/1.6    60    1.0 1.6    100     100LG-75/1.0 100LG-75/1.6    75    1.0 1.6    100     100LG-90/1.0 100LG-90/1.6    90    1.0 1.6    100     150LG-90/1.0 150LG-90/1.6    90    1.0 1.6    150     150LG-120/1.0 150LG-120/1.6    120    1.0 1.6    150     150LG-150/1.0 150LG-150/1.6    150    1.0 1.6    150