Dehydration Press Machine, Fujian Dehydration Press Machine Manufacturer, Fujian Environmental Protection Dehydration Equipment

Twin-Screw Press and Single-Screw Press—Choose Xinxiang Tianzhong Machinery. No need to search elsewhere; we have everything you need. Contact: Tel/WeChat: 18236160550 (Manager Zhu); Pre-sales QQ: 203778725. I. Application This machine is suitable for dewatering various moist waste materials, including domestic garbage, water hyacinth, fruit pulp, plastics, chemical waste, discarded vegetable leaves, and moisture-rich fibrous materials. It effectively reduces the water content and volume of pressed materials, minimizing odor and space occupation during incineration or landfill processes. II. Technical Specifications 1. Processing Capacity: 0–30 T/H 2. Press Screw (1) Diameter: 260–860 mm (2) Pitch: 160–800 mm (3) Rotation Speed: 12 r/min 3. Screen Cylinder Gap: 0.2–2.5 mm The machine is equipped with a feed hopper in the middle section. The material to be dewatered is fed into the hopper, where the juice extracted by the screw flows through the screen cylinder into a collection tray and is discharged via an outlet pipe. The dewatered residue is expelled from the outlet at the end of the screen cylinder. The working process of this twin-screw press is as follows: The feeding screw pushes the material from the hopper toward the pressing screw. As the screw pitch decreases and the shaft diameter increases, combined with resistance from the screen wall and the conical body, the liquid content (e.g., juice) is squeezed out. The extracted liquid flows through the screen holes and collects in a juice tray. The pressed residue is discharged from between the end of the screen cylinder and the conical body. A spring mechanism at the rear of the conical body allows adjustment of discharge resistance and residue outlet size, enabling control over the dryness of the pressed material. For models with capacities of 5, 10, and 20 T/H, the twin screws rotate in opposite directions, applying strong and uniform pressure on the material. The discharge cone is hydraulically controlled; adjusting the oil pressure alters the pressing effect and juice yield. This machine can also be used for solid-liquid separation of other materials, though effectiveness may vary depending on material properties. The feed hopper, screen cylinder, and screws are all made of high-quality acid- and alkali-resistant 304 stainless steel.