Coal Gas Emission Initial Velocity Measuring Instrument

Coal Gas Emission Initial Velocity Tester (Variable Volume and Pressure Type) and related accessory equipment functions and performance requirements are based on the variable volume and pressure type instrument specified in AQ1080-2009 for measuring the initial velocity of gas emission from coal.
Basic components of the equipment: The basic composition of the coal gas emission initial velocity tester (including but not limited to the following configurations):
3.1 Gas Emission Initial Velocity Tester (Variable Volume and Pressure Type): 1 unit;
3.2 Vacuum Pump: 1 unit; 3.3 Mechanical Stopwatch: 1 unit;
3.4 Methane Gas (including gas cylinder): 1 cylinder; 3.5 Methane Cylinder Pressure Reducing Valve: 1 unit;
3.6 Standard Sample Sieve Set: 1 set; 3.7 Electronic Balance: 1 unit;
3.8 Steel Straight Ruler: 2 units.
Main technical parameters:
4.1 Gas Emission Initial Velocity Tester (Variable Volume and Pressure Type): 1) Sample bottle volume (including pipelines) ≥5ml;
2) Fixed space volume ≥28ml (excluding sample bottle); 3) Air tightness: When no sample is installed, after degassing the emission space to level the mercury vacuum gauge liquid surface, stop the pump and let it stand for 5 minutes. The difference in the mercury vacuum gauge liquid surface should be less than 1mm.
4.2 Vacuum Pump: Air extraction capacity ≥2ml/s and ≤5ml/s, vacuum degree ≤4Pa; 4.3 Mechanical Stopwatch: 60s/revolution, accuracy 0.1s, meets metrological standards; 4.4 Methane Gas: 8L steel cylinder filling, purity ≥99.9%, with factory inspection certificate; 4.5 Methane Cylinder Pressure Reducing Valve: Copper material, reverse thread, well connected with the matched methane steel cylinder;
4.6 Standard Sample Sieve Set: Aperture 0.2mm and 0.25mm, 2 each, including sieve bottom and sieve cover, meets metrological standards;
4.7 Electronic Balance: Range ≥300g, sensitivity 0.1g, meets metrological standards;
4.8 Steel Straight Ruler: Range ≥500mm, small division 1mm, meets metrological standards.

Zhengzhou Aidi produces Coal Gas Emission Initial Velocity TesterSupplies coal drill cuttings desorption instrument, deep hole sampling device, pressure measuring instrument, geological exploration desorption instrument, borehole flow meter, mine extraction and outburst prevention equipment, coal true density tester, gas content tester, automatic gas emission initial velocity tester, diffusion velocity tester, coal extraction pipeline gas parameter instrument, isothermal high-pressure adsorption device ab value tester