YSLY

Product Introduction
Product Application
The product is suitable for fixed installations and occasional bending scenarios involving free, non-continuous reciprocating movement without tensile load. It is also applicable in dry or damp spaces subject to moderate mechanical loads and is suitable for torsional applications. A typical application is in the bridging areas of wind turbines (WTG).
Product Features
· Resistant to acids and alkalis
· Oil resistance complies with DIN EN 50290-2-22 (TM54)
Technical Certifications
· Complies with RoHS standards
· Complies with the 2014/35/EU Directive ("Low Voltage Directive") CE
· Customization is available for special structures, other dimensions, and core and sheath colors.

Structural Parameters
Conductor material: Bare copper wire
Conductor class: Complies with IEC 60228 cl.5
Core insulation: PVC-J-80-005
Core identification <0.5 mm²: Color-coded differentiation for 5 cores and below, compliant with n.DIN 47100; for multi-core cables with more than 5 cores, color-coded cores with white ink dots for differentiation; ≥0.5 mm²: Color-coded differentiation for 5 cores and below, including yellow/green ground wire, compliant with n.DIN 47100; for multi-core cables with more than 5 cores, black cores with white ink numbering for differentiation (customizable upon special request)
Stranding: Layered stranding
Outer sheath material: DQPVC-H-80-005
Outer sheath color: Gray RAL 7001
Rated voltage: 300/500 V
Test voltage: 2 kV
Minimum bending radius (fixed): 4xd
Minimum bending radius (mobile): 15xd

Temperature rating (fixed): -40°C to +80°C
Temperature rating (mobile): -5°C to +80°C
Operating temperature at +80°C: Short-circuit temperature up to +150°C
Standard: Complies with EN 50525-2-51