RVV2G Double Steel Wire Hoist Handle Cable

Product Introduction
Product Application
The electric hoist is connected to the arm controller via cable, widely used in dry or humid indoor environments, and can be forcibly guided for non-continuous lateral movement installations, such as electric hoists, cranes, flaw detection equipment, self-supporting shafts or inclined shelves, lifting equipment, ports, and other scenarios. The outer sheath can be specially customized according to different climatic conditions and usage scenarios, hence this product can also be used outdoors.
Product Features
· Water and oil resistant
· Wear-resistant
· Load-bearing and tensile-resistant
Technical Certification
· Customization available for special structures, other dimensions, core wire, and sheath colors

Product Structure
Conductor Material: Multi-strand finely stranded bare copper wire: Complies with VDE0295 CLASS 5 or 6 standard
Insulation: High-quality blended elastomer material, soft insulation
Color Identification: Colored core wires or black wire body with white numerical coding, with yellow/green dual-color grounding wire for 3 cores and above
Reinforcement: Multi-strand jute rope filler, one or two torsion-free self-supporting steel wires to bear operational tension
Core Structure: Anti-twist layered structure
Inner Lining: Flexible non-woven fabric wrapping the wire body for cushioning
Sheath Material: Specially blended weather-resistant elastomer material
Sheath Color: Black (RAL9005), Gray (RAL7001), Orange (RAL2003)
Rated Voltage: ≤1.5mm²: 300/500V, >1.5mm²: 450/750V
Test Voltage: ≤1.5mm²: 2500V, >1.5mm²: 3000V
Minimum Bending Radius: Fixed installation: 10xD (cable outer diameter); Mobile installation: 12xD (cable outer diameter)
Operating Temperature: Fixed installation: -30℃ to +80℃; Mobile installation: -20℃ to +80℃ (customizable -55℃ to +105℃)

Radiation Resistance: 8x10⁷ cJ/kg
Flame Retardancy: Complies with IEC60332-1 or -2