Carbon Nanotube Coating 620Cnts Vacuum Plated Molybdenum Disulfide for Robotic Arm Joint Bearings

DLC Diamond-Like Carbon Friction-Reducing Insulation Coating,

Modified DLC Conductive Coating,

Polyurea Waterproof and Impact-Resistant Coating,

Molybdenum Disulfide MoS2 Lubricating Conductive Coating,

Parylene N Coating,

Carbon Nano Coating.

Nickel Teflon Ni-P-PTFE,

Ti N Titanium Nitride,

Ti CN Titanium Carbonitride,

Ti Al N Titanium Aluminum Nitride,

AlCrN Aluminum Chromium Nitride,

Cr N Chromium Nitride,

Underwater Paint Sales,

Ceramic SiO2 Coating.

Dicronite-DLC-Diamond Coating-Vacuum Molybdenum Disulfide Coating-Vacuum Mirror Coating

Dicronite-DLC-Diamond Coating-Vacuum Molybdenum Disulfide Coating-Vacuum Mirror CoatingNanodeposition Coating Properties:

Coefficient of Friction:The coating's coefficient of friction is 0.005-0.15 (the coefficient of friction between stainless steel is 0.25);

Coating Thickness:Thickness 2~10 micrometers;

Coating Hardness:HRC32~HRC58; HV900-1500

Operating Temperature:Under atmospheric pressure: -50°C~800°C;

Corrosion Resistance:Salt spray test 200~400 hours;

Coating Biocompatibility:The coating is non-toxic, non-corrosive, and complies with medical-grade ROHS standards;

Dicronite-DLC-Diamond Coating-Vacuum Molybdenum Disulfide Coating-Vacuum Mirror CoatingNanodeposition Coating Application Areas:

DLC Diamond-Like Carbon Friction-Reducing Insulation Coating, Modified DLC Conductive Coating, Polyurea Waterproof and Impact-Resistant Coating, Molybdenum Disulfide MoS2 Lubricating Conductive Coating, Parylene N Coating, Carbon Nano Coating.

Nickel Teflon Ni-P-PTFE, Ti N Titanium Nitride, Ti CN Titanium Carbonitride, Ti Al N Titanium Aluminum Nitride, AlCrN Aluminum Chromium Nitride, Cr N Chromium Nitride, Underwater Paint Sales, Ceramic SiO2 Coating.

Carbon Nanotube Coating 620Cnts Vacuum Molybdenum Disulfide Coating Application Case for Robotic Arm Joint Bearings】

Keywords: Vacuum Molybdenum Disulfide Coating, Carbon Nanotube Coating, Joint Bearings, Robotic Joint Bearings, Wear Resistance, Lubrication

Customer Background: The customer is a well-known large bearing enterprise in China, providing various high-precision bearings year-round.

Product Background:

Bearing Base Material: Bearing Steel,

Coating Requirements: Wear resistance, lubrication, load capacity 15～18KN,

Operating Environment: High load, low speed,

Application Areas: Joint bearings on robotic arms, robot bearings, joint bearings.

Before Coating: The bearing surface was covered with PTFE fabric. After 20,000 cycles, the fabric began to rupture extensively. After further operation, it became unusable. Continuing to 200,000 cycles, the bearing clearance increased severely, and the raceway wear was extremely serious. There was an urgent need for a high-wear-resistant coating that could address wear resistance, lubrication, and a load capacity of 15～18KN to solve this challenging wear issue. Often, even with extensive effort and time spent on the bearing material, the results were minimal because the bearing itself had already reached a relatively high level of performance.