The main coating for guide wires is the PTFE coating.

Guidewire

The main coatings for guidewires include hydrophilic coating, silicone oil coating, and PTFE coating. The combination of hydrophilic coating with a polymer outer layer can more effectively enhance the guidewire's trackability. Coated guidewires utilize excellent spraying technology and special PTFE coating techniques to increase smoothness, reduce friction coefficient, and minimize thrombus formation, facilitating surgical operations for physicians. 2. J-tip memory design allows repeated straightening without deformation of the J-tip. The improved material shaft design enhances shaft stiffness.

Understanding of coatings can be simply summarized as follows: Coated guidewires are smoother than uncoated ones. Silicone oil coating offers moderate smoothness, sacrificing some slipperiness for better tactile feedback at the guidewire tip. Standard hydrophilic coating is relatively smooth. The combination of hydrophilic coating with a polymer outer layer makes the guidewire tip extremely smooth—very slippery. In simple terms, uncoated guidewires are like rough flooring in an unfinished house—grippy and not slippery. Silicone oil coating feels like applying a layer of wax, similar to painting a floor directly—smooth but not too slippery. Hydrophilic coating is like installing high-quality wooden flooring—slippery! Polymer outer layer + ultra-slippery coating is like waxed and watered wooden flooring—very slippery and prone to causing slips.

The main coatings for guidewires include hydrophilic coating, silicone oil coating, and PTFE coating. The combination of hydrophilic coating with a polymer outer layer can more effectively enhance the guidewire's trackability. Understanding of coatings can be simply summarized as follows: Coated guidewires are smoother than uncoated ones. Silicone oil coating offers moderate smoothness, sacrificing some slipperiness for better tactile feedback at the guidewire tip. Standard hydrophilic coating is relatively smooth. The combination of hydrophilic coating with a polymer outer layer makes the guidewire tip extremely smooth—very slippery. In simple terms, uncoated guidewires are like rough flooring in an unfinished house—grippy and not slippery. Silicone oil coating feels like applying a layer of wax, similar to painting a floor directly—smooth but not too slippery. Hydrophilic coating is like installing high-quality wooden flooring—slippery! Polymer outer layer + ultra-slippery coating is like waxed and watered wooden flooring—very slippery and prone to causing slips.

To reduce friction between devices and blood vessels, lubricious coatings have been widely applied to the surfaces of intravascular catheters, guidewires, and delivery systems used in vascular interventions. The application of lubricious coatings on vascular interventional devices can improve surface biocompatibility, reduce damage to vessel walls, minimize disruption to blood flow layers during procedures, and enhance device navigation through tortuous vasculature, thereby lowering surgical difficulty. However, in some cases, coatings may detach from the device surface, leading to adverse events. In recent years, there have been increasing reports focusing on coating delamination, with associated risks including retention of coating fragments in patients, local tissue reactions, thrombus formation, and even severe adverse events such as pulmonary and myocardial embolism, embolic stroke, tissue necrosis, and death.