Nylon cable ties use high and low temperature tensile testing chamber.

Nylon cable ties are tested using the high and low temperature tensile testing chamber AP-LL-5kN to verify their tensile strength, weather resistance, and reliability under extreme temperatures, ensuring the product meets usage requirements in various environments.

I. Test Purpose and Significance

As a bundling tool, nylon cable ties are used in fields such as electronics, automotive, and aerospace, requiring stable performance in high temperature, low temperature, or temperature-changing environments. The high and low temperature tensile testing chamber can simulate extreme temperature conditions to test the following characteristics of nylon cable ties:

Tensile strength: Verify the load-bearing capacity of the cable tie after low-temperature embrittlement or high-temperature softening.

Weather resistance: Evaluate aging after long-term exposure to high or low temperatures.

Reliability: Ensure the cable tie maintains its self-locking function under extreme temperatures, avoiding loosening or breakage.

II. Test Methods and Procedures

Sample preparation: Select standard specifications of nylon cable ties (e.g., width 4.8mm, length 300mm).

Temperature settings:

Low-temperature test: Set to -40°C (simulating extreme cold environments), maintain for 24 hours.

High-temperature test: Set to 150°C (simulating high-temperature environments), maintain for 24 hours.

Tensile test:

Secure the cable tie in the testing chamber fixture, apply standard tension (e.g., 25kg).

Observe whether the cable tie breaks, slips, or the head cracks.

Data recording: Record the maximum tension at break and compare it with the standard value.

III. Key Test Indicators for Nylon Cable Ties Using the High and Low Temperature Tensile Testing Chamber AP-LL-5kN

Breakaway force: The cable tie must only break or reverse teeth above the standard tension to ensure safety in practical use.

Flexibility: High-quality cable ties maintain ductility at low temperatures, avoiding brittle fracture.

Appearance quality: Check for defects such as residual teeth on the toothed belt or head tooth cavity, mold deviation marks, etc.

IV. Core Functions of the High and Low Temperature Tensile Testing Chamber

Temperature control:

Range: -70°C to 300°C, accuracy ±1°C.

Heating/cooling rate: 1.0°C to 3.0°C/min, quickly simulating temperature-changing environments.

Mechanical testing:

Loading rate: 0.1mm/min to 500mm/min, supporting tensile, compression, and bending tests.

Capacity: 2kg to 2000kg, covering testing needs for cable ties of different specifications.

Safety design:

Over-temperature protection, leakage protection, emergency stop device to ensure operational safety.

V. Test Cases and Data

Low-temperature test:

A certain brand of nylon cable tie, after being frozen at -25°C for 24 hours, could still lift a 25kg weight without embrittlement or breakage.

High-temperature test:

High-temperature-resistant cable ties, after being maintained at 150°C for 24 hours, showed a tensile strength decrease of no more than 10%.

VI. Application Scenarios and Advantages

Industrial production:

Verify the reliability of cable ties in automotive engine compartments (high temperature) or Arctic research equipment (low temperature).

Quality control:

Screen out cable ties with poor weather resistance through high and low temperature cycle testing, reducing after-sales issues.

R&D improvement:

Optimize material formulations (e.g., adding anti-freeze or heat-resistant agents) based on test data to enhance product performance.

VII. Selection Recommendations for Nylon Cable Ties Using the High and Low Temperature Tensile Testing Chamber AP-LL-5kN

Temperature range: Choose based on the actual usage environment, e.g., outdoor equipment requires -40°C to 150°C.

Capacity and accuracy: Select based on cable tie specifications, e.g., testing 25kg load-bearing cable ties requires a 50kg capacity device.