Paint Testing Dual 85 Test Chamber

I. Working Principle of the Double 85 Test Chamber for Coatings Testing

The Double 85 test chamber simulates the environmental conditions that coatings may encounter in actual use by precisely controlling temperature and humidity. Under high-temperature conditions of 85°C and high humidity of 85% RH, coating samples undergo an accelerated aging process, allowing potential issues that may arise during long-term use—such as discoloration, cracking, peeling, and reduced adhesion—to be identified in a short period. Technical parameters:

Heating time: Approximately 3°C per minute (non-linear, no load)

Cooling time: Approximately 1°C per minute (non-linear, no load)

Temperature/Humidity range: Temperature: A: 0°C to 150°C; B: -20°C to 150°C; C: -40°C to 150°C; D: -70°C to 150°C

Temperature fluctuation: High temperature: Less than ±0.5°C

Temperature uniformity: Less than 2°C

Inner and outer chamber material: Inner chamber: SUS304 stainless steel plate; Outer chamber: Stainless steel plate or spray-painted steel plate

Insulation material: Rigid polyurethane foam + glass wool

Water supply method: Automatically controlled by an electronic liquid level controller, with residual water recovery and low-water alarm

Humidification method: External isolation type, fully stainless steel electric steam generation humidification

Dehumidification method: Condensation method using evaporator coil dew point temperature laminar flow contact dehumidification

II. Application Scenarios of the Double 85 Test Chamber in Coatings Testing

Weather resistance testing: Evaluates the durability of coatings under high-temperature and high-humidity conditions to predict their service life in actual use.

Performance comparison: Compares the performance of different formulations or brands of coatings under environmental conditions to optimize product formulations.

Quality control: Screens out substandard products during the coatings production process through Double 85 testing to ensure the quality stability of finished products.

R&D validation: Verifies whether the performance of new coatings meets design requirements during the R&D phase through Double 85 testing.

III. Significance of the Double 85 Test Chamber in Coatings Testing

Accelerated aging: Accelerates the aging process of coatings under high-temperature and high-humidity conditions, shortening testing cycles and improving R&D efficiency.

Issue exposure: Quickly exposes potential problems of coatings under environmental conditions, such as coating failure and reduced adhesion.

Performance evaluation: Assesses key performance indicators of coatings, such as weather resistance and resistance to heat and humidity, through test data.

Standard compliance: Many coatings industry standards (e.g., ISO, ASTM) require Double 85 testing to ensure products meet relevant standards.

IV. Precautions for Using the Double 85 Test Chamber

Sample preparation: Ensure coating samples are uniformly applied to the substrate and fully cured before testing.

Testing conditions: Strictly adhere to standard temperature and humidity settings to avoid inaccurate test results due to deviations.

Testing cycle: Select an appropriate testing cycle (e.g., 500 hours, 1,000 hours) based on the type of coating and testing objectives.

Data recording: Regularly record performance indicators of coatings, such as appearance changes, adhesion, and hardness, for subsequent analysis.

Equipment maintenance: Regularly calibrate the temperature and humidity sensors of the test chamber to ensure the accuracy of testing conditions.

V. Importance of the Double 85 Test Chamber for Coatings Testing

The Double 85 test chamber is an essential tool in coatings R&D, production, and quality control. By simulating environmental conditions, it enables rapid evaluation of the durability and reliability of coatings, helping companies optimize product formulations, improve product quality, and meet industry standards. For coatings manufacturers, owning a high-precision Double 85 test chamber is key to enhancing competitiveness.