Construction site mobile air-blowing dust suppression cannon, road construction dust suppression and cooling fog cannon, road repair dust suppression air-blowing long-range fog cannon.

Construction Site Mobile Air-Send Dust Removal Fog Cannon Machine Road Construction Dust Removal and Cooling Fog Cannon Machine Road Repair Dust Removal Air-Send Long-Range Fog Cannon Machine

Product Features: 1. Strong power, long range, wide coverage, capable of precise spraying, high work efficiency, and fast spraying speed. 2. When spraying water for dust removal on stockpiles that easily cause dust, the sprayed mist is fine, and upon contact with the rising dust, it forms a moist mist that quickly suppresses and settles the dust. 3. Flexible supporting power: can use three-phase 380V mains electricity or be paired with a diesel generator set for power supply. 4. Can be fixed on a concrete-cast platform or installed on a vehicle with a diesel generator set for power supply. 5. Flexible operation, safe and reliable use, with remote control and manual control options, allowing free adjustment of the horizontal rotation spraying angle. 6. Water consumption is 70%-80% less compared to other dust suppression spraying equipment (such as spray guns and water sprinklers), and the area covered by water mist for dust suppression is far larger than other dust suppression spraying equipment. If operated or stored improperly, the sprayer is prone to corrosion, shortening its service life. Therefore, the following points should be noted for maintenance: 1. Before operation, follow the instructions to check and adjust the condition of each component, lubricate the lubrication points, and keep the machine clean. 2. After operation, promptly rinse with clean water several times to thoroughly clean any residual liquid in the medicine tank, liquid pump, and pipes. Check if the sprayer has any faults and allow it to dry.
3. After seasonal operation, if the sprayer is to be stored for a long time, besides cleaning the machine body, remove components such as the V-belt, spray hose, nozzle, mixing device, and suction pipe, rinse them clean, and store them together with the machine body in a cool, dry place. If they are rubber products, hang them on the wall to avoid damage from compression. At the same time, keep them away from highly corrosive items such as fertilizers and pesticides to prevent rust and damage. Application Effects of the High-Pressure Spray Dust Suppression System: 1. Before the transformation of the spray dust suppression system, comprehensive individual dust concentration sampling analysis: 6.09-6.44 mg/m³ (respirable dust concentration). After the transformation of the spray dust suppression system, comprehensive individual dust concentration sampling analysis: 3.25-3.65 mg/m³ (respirable dust concentration). 2. The outlet pressure of the spray dust suppression pump can reach 6.3 MPa, and the water flow fully meets the water demand for internal and external spray dust suppression of the shearer. It operates smoothly and safely with no water leakage. 3. The dust prevention water and dust suppression agent, after being proportioned in the mixing box, serve to filter the dust prevention water. The air curtain formed by the shearer’s spray effectively controls the spread of dust sources, preventing dust from diffusing throughout the entire working space and worsening the workers' environment. It largely avoids the impact of the upward spray from the drum on the shearer operator.