HM Multi-Model Industrial SSI Signal Conversion Instrument CJ

Haomiao Technology Multi-Model Industrial-Grade SSI Signal Converter CJ

Operating Parameters

*Input Signal:  Absolute encoder synchronous serial SSI signal, Gray code (multi-turn 24-26 bit, or 10-28 bit linear sensor, specify when ordering, other bit lengths customizable).

1 external reset switch signal; when input, it can set zero or a specified position.

*Operating Voltage:  220Vac  (24Vdc available upon request)

*Output Type:  One 4-20mA analog output. D/A output accuracy 12-bit.

One RS485 full digital output, with built-in communication protocol, customizable to customer requirements.

2~4 preset position outputs. Relay dry contacts, 2 switches as normally open + normally closed, others as normally open.

*Ambient Temperature:  -10℃～60℃

*Relative Humidity:<90%

*Transmission Distance: Sensor to instrument connection distance up to 100 meters (specify when ordering for over 100 meters, maximum not exceeding 250 meters).

Recommended cable: FK042011 (for distances over 50 meters).

Output signal transmission distance up to 1000 meters (4-20mA transmission cable total impedance less than 400 ohms).

Function Settings

*Digital Display:  6-digit display, decimal point position adjustable.

*Zero Setting:   Set zero or specified position anywhere. Can be set via panel or external switch.

*Stroke Length Setting:   Total length setting for linear encoder.

*Direction Setting: Encoder forward/reverse direction setting.

*Analog Output: 4-20mA output corresponding value setting; zero and full-scale point calibration.

*RS485 Output: RS485 output, address and baud rate setting, communication protocol customizable to customer requirements.

*Switch Settings:  Multiple preset switch panel settings, switch type configuration.

*Non-linear Setting: 16-segment non-linear setting or on-site correction, applicable for hoisting layers, arc gate settings.

*Remote Display:   Output signal can be connected to PLC and remote display instrument separately.

Haomiao Technology Multi-Model Industrial-Grade SSI Signal Converter CJ