CAP-3022-S-T6-4-1-4-L Dosing Tank Level Gauge

Product Name: CAP-3022-S-T6-4-1-4-L Intelligent Capacitance Level Gauge
Product Description:
The CAP-3022-S-T6-4-1-4-L Intelligent Capacitance Level (Liquid) Gauge is manufactured using advanced radio frequency capacitance detection technology, supplemented by industrial-grade range measurement system temperature drift compensation technology, and single-section material (liquid) phase medium dielectric constant change automatic compensation technology. It is specifically designed and manufactured for industrial environments where the composition of gas (vapor) phase media is relatively stable, but the dielectric constant of the material (liquid) phase media changes significantly, such as in soluble media level, powder, and granular material level measurement and control applications..

Working Principle of CAP-3022-S-T6-4-1-4-L Intelligent Capacitance Level Gauge
Utilizing the relationship between level changes and the resulting capacitance changes on the measuring probe, the detected capacitance changes are processed through the measurement system's temperature drift compensation and material (liquid) phase medium dielectric constant change compensation. This is calculated via dedicated pattern system software to output a two-wire 4–20 mA analog current loop proportional to the level change, along with four sets of SPST (NO) solid-state relay contacts.

Technical Features of CAP-3022-S-T6-4-1-4-L Intelligent Capacitance Level Gauge
1. Two-wire current loop with isolation between the measurement system and the current loop;
2. Automatic temperature drift compensation for the measurement system;
3. Automatic compensation for changes in the dielectric constant of the material (liquid) phase medium;
4. Excellent electromagnetic compatibility characteristics certified by CE;
5. Continuous measurement of liquid level, material level, and interface;
6. Superior linear measurement with smaller resolution units;
7. Low power consumption, no moving parts, and excellent craftsmanship;
8. Resistant to high temperature, high pressure, and strong corrosion;
9. Chinese operating environment, easy calibration, with self-diagnosis.

Technical Specifications
Operating Voltage: Maximum: 30V
Minimum: 18V (CAP-3022-R, when output is 3.5mA)
15V (CAP-3022-S, when output is 3.5mA)
10V (when output is 22mA)
Current Loop: Two-wire 3.5mA–22mA
Fault Alarm Current: 3.5mA or 22mA, configurable
Isolation Performance: Measurement system isolated from the current loop
Explosion-Proof Rating: ExiaIICT6 (-40℃ to 70℃)
ExiaIICT1~T5 (-40℃ to 85℃)
Explosion-Proof Parameters:
Power Input:
Ui=30V, Ii=100mA, Pi=0.75W
Ci=100pF, Li=10uH
Solid-State Relay (each group):
Ui=30V, Ii=100mA, Pi=0.75W
Ci=150pF, Li=10uH
Measuring Range: 0–8 meters
Measurement Cycle: 0.5 seconds
Resolution: 0.02mm
Temperature Drift: ±0.5mm (-40℃ to 85℃)
Operating Pressure: 6MPa Max
Linearity Deviation: ±(1+0.05%FS) mm
Solid-State Relay (CAP-3022-R):
Configuration: Four groups of SPST (NO) solid-state relays
Load Voltage: 220V AC/300V DC (non-explosion-proof environments)
30V DC/AC (explosion-proof environments)
Load Current: 100mA (-40℃ to 40℃)
50mA (-40℃ to 85℃)
Alarm Mode: "Open, Close Alarm" optional
Five independent alarm modes selectable
Delay: 1–60 seconds, independently programmable
Medium Temperature: -150℃ to 150℃
Ambient Temperature: -40℃ to 85℃ (ExiaIICT1-T5)
-40℃ to 70℃ (ExiaIICT6)
Storage Temperature: -55℃ to 100℃
Communication Protocol: HART
Protection Rating: IP65
Electromagnetic Compatibility: CE certified
Associated Device: CAP-3000S Handheld Operator
Typical Applications
Level measurement and control for various atmospheric and low-pressure boilers, water heaters, tanks, and evaporators.
Liquid CO2 level measurement and control.
Powder level measurement and control for coal powder, coal ash, fossil powder, cement powder, etc.
Level measurement and control for various batching, dosing, and industrial processing tanks (pools, containers).
Level measurement and control for various light oils, solvents, etc.