Z6CN17.12 Stainless Steel

Z6CN17.12To ensure consistent high quality, Benlai Metal conducts annual customer satisfaction evaluations, continuously understands customer interests, and ensures the provision of efficient, customer-oriented processing services.

Z6CN17.12 For other special specifications, Benlai can customize according to customer needs! If needed, you can contact Benlai via phone, QQ, fax, email, etc., and Benlai will respond to you as quickly as possible!
#################################################################
Introduction to Z6CN17.12 Stainless Steel
Stainless steel round bars fall under the category of long products and also belong to bar products. So-called stainless steel round bars refer to long products with a uniform circular cross-section, generally about four meters in length.
Stainless steel round bars have broad application prospects and are widely used in hardware kitchenware, machinery, shipbuilding, petrochemicals, aerospace medicine, food, power, energy, construction decoration, equipment used in seawater, chemical, dye, papermaking, oxalic acid, fertilizer production equipment, photography, food industry, coastal facilities, ropes, CD rods, bolts, nuts.
#################################################################
Z6CN17.12 Stainless Steel Round Bar Execution Standards
Products: GB, JIS, ASTM, DIN EN.
National Standard: GB/T1220-2007
American Standard: ASTM A484/A484M, ASTM A213/213A, ASTM A269/269M
etc.
#################################################################
Z6CN17.12 Chemical Composition
Z6CN17.12

French Z6CN17.12 Execution Standard: NF
Z6CN17.12 stainless steel is used for cutting tools, measuring tools, and bearings. It has high hardness and good wear resistance. When grinding, its drawback is that it is quite sticky and heats up quickly, but it is easier to grind than any carbon steel, and cutting with a hand saw is also much easier.
Material Number: Z6CN17.12
Z6CN17.12 Chemical Composition:
Carbon C: 0.75~0.95
Silicon Si: ≤1.00
Manganese Mn: ≤1.00
Phosphorus P: ≤0.040
Sulfur S: ≤0.030
Chromium Cr: 16.00~18.00
Molybdenum Mo: ≤0.6
Nickel Ni: ≤0.6
Vanadium V: —
Z6CN17.12 Hardness: Annealed, ≤255HB; Quenched and Tempered, ≥56HV
#################################################################
About Stainless Steel
Stainless steel plays a vital role in the hygiene preparation or storage of almost everything we eat or drink. All modern cars also have stainless steel components in critical areas, such as exhaust systems, seat belt buckles, airbag gas cylinders, and catalytic converters. Increasingly, stainless steel is being found in new applications in decoration, signage, shop fittings, architecture, furniture, equipment, and technology.

Stainless steel is generally regarded as a family of chromium-containing alloys. All these alloys contain at least 11% chromium. The chromium oxide layer on the metal makes stainless steel corrosion-resistant. This layer is only one micron thick, but it is incredibly strong and, when damaged, regenerates itself as long as oxygen is present.

The main branches of the stainless steel family tree are martensitic, ferritic, austenitic, and duplex stainless steels. The most commonly used types of stainless steel are ferritic, austenitic, and duplex stainless steels.

Ferritic stainless steels are pure chromium types with chromium content of 12%, with the balance mainly iron. Austenitic stainless steels typically contain 18% chromium and 8% nickel, with the balance mainly iron, while some austenitic stainless steels contain 2% molybdenum to enhance resistance to pitting corrosion. Duplex stainless steels have a microstructure, when normally heat-treated, with almost equal proportions of austenite and ferrite. This microstructure ensures that the tools are more resistant to stress corrosion cracking (SCC) than austenitic stainless steels.
#################################################################
Source: "Shanghai Benlai Metal Materials Co., Ltd."