Isopar M

I. Introduction to Isopar M

Isopar M (isohexadecane) is an isoparaffinic solvent oil, belonging to the category of paraffinic solvent oils. It has a distillation range of 225~254°C, a flash point of 94°C, a density of 0.788g/cm³, a viscosity of 3.57mm²/s (25°C), an aromatic content of 0.01%, a relative evaporation rate of <0.01 (n-BuAc=1), a KB value of 25, a bromine value <5 mg/100g, a surface tension of 27 mN/m (25°C), and a refractive index of 1.437 (20°C).

The product is packaged in iron drums, with a specification of 163 kg/drum. Bulk packaging is available for large quantities.

Isopar M can be used as a metalworking fluid (electrical discharge machining fluid, rust preventive oil), a solvent for consumer products (insecticide aerosol solvent, liquid sprayer solvent), and as a lubricant, release agent, and plasticizer in the rubber and plastics industries.

The advantages of Isopar M include: almost odorless, narrow distillation range, compatibility with most product surfaces, not classified as hazardous during transport, not classified as a VOC substance or exempt from low-pressure protection, and suitable for indirect food contact equipment.

II. Isoparaffin Isopar M Quality Index Report

III. Precautions

1. ExxonMobil environmentally friendly solvent oil drums have an ExxonMobil anti-counterfeiting mark on the lid and an anti-counterfeiting barcode on the drum surface. Identify the brand to avoid counterfeits.

2. Environmentally friendly solvent oil should not be stored upright outdoors to prevent contamination by moisture and impurities.

3. For indoor storage, place upright with the drum facing up for easy extraction.

4. Tighten the lid to keep the drum sealed.

5. Do not place flammable materials nearby. Open flames are strictly prohibited, and do not bring ignition sources near the drum.

6. Store flammable specialty oils or chemical solvents separately and mark with flammable material signs.