I. Introduction to ExxonMobil Isopar C Product
ExxonMobil Isoparaffin Series: Isopar C, Isopar E, Isopar G, Isopar H, Isopar L, Isopar M. Extremely low sulfur and benzene content, with other aromatic hydrocarbon compounds controlled below 1%. The most comprehensive product categories, narrow boiling range, and multiple choices to meet various quality requirements. The products can fully replace domestic No. 6 extraction solvent oil, No. 70 fragrance solvent oil, No. 90 petroleum ether, No. 120 rubber solvent oil, No. 180 aviation cleaning oil, No. 190 industrial gasoline, No. 200 mineral spirits, No. 260 kerosene-type special solvents, and other solvents. Cleaning agents can replace toxic solvents such as TCE, MC, etc. Isopar C can be used as an industrial cleaning fluid (for cleaning electronic and electrical equipment), consumer product solvent (for aerosol insecticide solvents, polish solvents). The advantages of Isopar C include: almost odorless, extremely narrow boiling range, low viscosity, compatibility with most product surfaces, easy evaporation, and suitability for indirect food contact equipment.
II. Isoparaffin Isopar C Quality Index Report
Item | Quality Index | Reference Standard | Test Method |
Boiling Range (°C) | 98-104 | ASTM D86/ASTM D1078 | Measured |
Flash Point (°C) | ＜0 | ASTM D56/ASTM D93 | Measured |
Density (15°C, g/cm³) | 0.698 | ASTM D4052 | Measured |
Viscosity (25°C, mm²/s) | 0.72 | ASTM D445 | Measured |
Aromatic Hydrocarbon Content (%, by Volume) | ＜0.01 | ASTM D1319 | Measured |
Relative Evaporation Rate (n-BuAc=100) | 446 | EC-M-F01 | Measured |
Aniline Point (°C, mixed) | 78 | ASTM D611 | Measured |
Bromine Number (mg/100g) | ＜5 | ASTM D2701 | Measured |
Color (Saybolt) | +30 | ASTM D156/ASTM D1500 | Measured |
III. Precautions
1. ExxonMobil environmentally friendly solvent oil drums have ExxonMobil anti-counterfeiting marks on the lid and anti-counterfeiting barcodes on the drum surface. Identify the brand to avoid counterfeits.
2. Environmentally friendly solvent oil should not be stored upright in outdoor environments to prevent contamination by moisture and impurities.
3. For indoor storage, place upright with the drum facing up for easy extraction.
4. Tighten the seal cap to keep the oil drum sealed.
5. Do not place flammable materials nearby; open flames are strictly prohibited, and do not bring ignition sources near the oil drum.
6. Store flammable specialty oils or chemical solvents separately and place flammable material signs.
