Marine water robot, intelligent life-saving device, remote control life buoy, rapid lifeboat for reservoir and sea areas, with CCS certificate

Maritime water robot, intelligent lifebuoy remote control life ring, rapid lifeboat for reservoir and sea area with CCS certificate. Maritime water robot, intelligent lifebuoy, water robot

1.1 ★Product weight: ≤10.5 kg; Suitable for single-person carrying, the device is equipped with lights and alarm sounds

1.2 Provided buoyancy: ≥18 kg;

1.3 Rescue load capacity: more than 80 kg;

1.4 No-load speed: ahead speed ≥12 knots (6 m/s), manned ahead speed: ≥4 knots (2 m/s)
Reverse speed: ≥0.5 knots;

1.5 Operability: Remote control operation, can perform basic actions such as forward, left turn, right turn, reverse, automatic return and so on;

1.6 Endurance time: no less than 40 minutes;

1.7 Remote control distance: ≥800 meters; The communication system adopts radio 433MHZ point-to-point communication mode, which has stronger anti-interference ability;

1.8 ★Automatically right itself after entering the water upside down or being washed over by waves;

1.9 ★The device can turn in place

1.10 Airdrop from a height of ≥20 meters;

1.11 Supports Beidou/GPS dual positioning;

1.12 One-key automatic return function, automatic return when disconnected, return accuracy less than 3 meters;

1.13 ★0-second start, starts immediately after leaving the rack or magnetic switch, no waiting required;

1.14 The device can be used normally without damage even if the charging port cover is not tightened

1.15 The shell is made of corrosion-resistant and UV-resistant HDPE (High Density Polyethylene) material

1.16★The charging box adopts an integrated mode, which can charge the host and the remote controller at the same time, and the remote controller uses wireless charging mode;
1.17 The product has passed the high and low temperature test specified in GB/t2423.22-2012 Environmental Test for Electrical and Electronic Products, and will provide relevant certificate copies with the official seal of the factory;

1.18 The product has passed the CCS type approval report of the classification society, and has the product certificate issued by CCS (provide the certificate copy with the official seal of the factory)