PTFE-lined gate valve
Other Products
I. Introduction:
A PTFE-lined gate valve is a type of gate valve. The opening and closing element of the gate valve is the gate, whose moving direction is perpendicular to the fluid direction. The gate valve can only be fully opened or fully closed, and cannot be used for regulation or throttling. Gate valves adopt forced sealing, meaning that when the valve is closed, external force is required to press the gate against the valve seat to ensure the sealing performance of the sealing surface. The gate of a PTFE-lined gate valve moves linearly together with the valve stem; this type is called a rising stem gate valve, also known as an outside screw and yoke gate valve. Usually, there is a trapezoidal thread on the stem. Through the nut at the top of the valve and the guide groove on the valve body, the rotary motion is converted into linear motion, which means the operating torque is converted into operating thrust.
II. Advantages:
1. Small fluid resistance, and the sealing surface is less subject to scouring and erosion by the medium.
2. More labor-saving in opening and closing.
3. No restriction on the flow direction of the medium, no turbulence, and no pressure drop.
4. Simple shape, short structural length, good manufacturability, and wide application range.
III. Main Part Materials:
Model | Materials | ||||
Valve Body & Bonnet | Gate & Valve Stem | Valve Stem Nut | Packing | Handwheel | |
Z41F46-16 | Gray Cast Iron Lined with Fluoroplastic | Carbon Steel Lined with Fluoroplastic | Ductile Iron or Aluminum Bronze | Polytetrafluoroethylene (PTFE) | Ductile Iron |
Z41F46-16C | Cast Steel | ||||
Z41F46-25 | |||||
IV. Product Parameters:
Model | PN | Working Pressure/MPa | Applicable Temperature/℃ | Applicable Medium |
Z41F46-16 | 16 | 1.6 | ≤150 | Corrosive Media |
Z41F46-16C | ||||
Z41F46-25 | 25 | 2.5 |
V. Installation and Maintenance:
1. The handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collisions are strictly prohibited.
2. The gate valve shall be installed vertically (i.e., the valve stem is in a vertical position and the handwheel is at the top).
3. Install in accordance with the provisions of the product instruction manual.
4. If the valve is frequently opened and closed, lubricate it at least once a month.
| Industry Category | Machinery & Equipment/Valves/Gate Valves |
|---|---|
| Product Category | |
| Brand: | 上海舟腾 |
| Spec: | Z41F4 |
| Stock: | 99 |
| Manufacturer: | 上海舟腾泵阀制造有限公司 |
| Origin: | 113120 |
